Description
NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click here Jacuzzi® & Sundance® LX Parts
This Listing is a 4 Horse Power 56 Frame Pump Wet End with Bleeder Barb that fits Intertek LX Brand Pump Motors only. These pumps usually have the part number WUA-400, WP-400 or LP-400 on the label. Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 413/16" from the back to front edge. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread.
This wet end comes complete with the Impeller, Seal and Wear Ring already installed..
NOTE: This Wet End looks a lot like an Aqua-Flo and a CMP Wet End but they do not interchange!
If your original Wet End has a Bleeder Barb and the heads of the Bleeder Screws in your old wet end have a spot for a flat screw driver you will need a new bleeder barb... If the original has a wing nut style you already have the newer style bleeder barb and will only need a new one if your original one breaks..
For the bleeder barb alone for this wet end Click Here: Barbed Bleeder Plug WUA Intertek LX 48 or 56 Frame Wet End Fine Threads
Note: This Wet End Fits Guangdong Chinese LX and LP series Pumps only Some Pump Part numbers are as follows: (WUA400-II, WUA400-I) (LP400) (WP400-II/,400-I)
