O-Rings & Gaskets

5"x 5"Flange ElementWelded construction most commonly used in plastic manifolds such as Brett Aqualine, Premier, Allstate, and Hot Water products. Dual 5/16" thermowells, studs for thermodisc, 1/8"npt pressure switch tap, hole for current collector bolt...

This part is a Set of (10) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (8) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Lip Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (6) Standard 2" Heater or Pump Union Gasket with 2 1/2" Center to Center Lip... The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (4) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

You are buying a 2 1/2" Thread X 2" Slip Heater Union with Gasket that matches Union. The Union receives a 2" pipe or fitting on the glue side and then Screws to a 2 1/2'" Heater Flange using a 2 1/2" Nut on the heater side...

This part has been discontinued by it's manufacturer.. You are buying a 2 1/2" Thread X 1 1/2" Slip Heater Union with Gasket that matches Union. The Union receives a 1 1/2" pipe or fitting on the glue side and then Screws to a 2...

This part is a Volute O-Ring, 6" ID, 3/32" Thick, Vico Ultimax, 48 or 56 Frame...

This part is a Volute O-Ring, 5" ID, 3/32" Thick, Vico Ultima Series, 48 or 56 Frame...