PVC Plumbing Fittings

This Kit is a 12' Long RADKit® designed to go onto the outside of a 2" fitting and seal off the area between (2) 2" Fittings Outside to Outside.. An example would be if you had a Suction fitting dripping at the glue joint and there is a piece of 2"...

This kit is a 6' Long RADKit® designed to go onto the outside of a 2" fitting and seal off the area between (2) 2" Fittings Outside to Outside.. An example would be if you had a Suction fitting dripping at the glue joint and there is a piece of 2"...

You are buying an Add On Air Bleeder kit featuring a Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug, (2) Clamps for each end of the tubing and 36" of Clear 3/8" ID and Silicon sealer.. This kit can be added if you are having...

This part is a 1-1/2" Slip (2"Spigot) on each end Clear Check Valve found on Watkins Hot Tubs HotSpring 1989 To Present and All Tiger River Models..   

This Kit is a 2" Manifold Coupler Kit for 5+ Manifolds. The Kit consists of (1) 2" Coupler, 2"Slip X 2"Slip (6") of 2" Flex Pipe, (1) Full Pint of Christy's Red Hot Blue Glue and (1) 1/4 Pint of Christy's Purple Primer. The kit is to be used...

This Kit is a 2" Manifold Coupler Kit for 3-4 Manifolds. The Kit consists of (1) 2" Coupler, 2"Slip X 2"Slip (6") of 2" Flex Pipe, (1) 1/2 Pint of Christy's Red Hot Blue Glue and (1) 1/4 Pint of Christy's Purple Primer. The kit is to be used...

This part is a 2" Manifold Coupler Kit for 1-2 Manifolds. The Kit consists of (1) 2" Coupler, 2"Slip X 2"Slip (6") of 2" Flex Pipe, (1) 1/4 Pint of Christy's Red Hot Blue Glue and (1) 1/4 Pint of Christy's Purple Primer. The kit is to be used...

This kit is a 2" Slip X Dead End X (4) 3/4" Barbs X (1) 3/4" Barb manifold repair kit for freeze damaged Cal Spa or Coleman Spas with 4oz of Christy's Red Hot Blue Glue. These manifolds are found on the left front side of the tub usually...

You are buying a Set of (10) 1 1/2" Slip X 1 1/2"Slip Coupler PVC Plumbing Fittings. The Coupler receives a 1 1/2" fitting which measures 1 7/8" OD on one side and then receives a 1 1/2" fitting which measures 1 7/8" OD on the other side. The...

This part is a Set of (10) 2" Slip X 2"Slip Coupler PVC Plumbing Fitting. The Coupler receives a 2" fitting which measures 2 3/8" OD on one side and then receives a 2" fitting which measures 2 3/8" OD on the other side. The...

You are buying a set of (10) 90° 1 1/2" Slip X 1 1/2"Slip PVC Plumbing Fitting. The 90° ELL receives a 1 1/2" fitting on each side which would measure 1 7/8" Inside Diameter. Any 2"  fitting (which measures 1 7/8" outside diameter) will...

You are buying a set of (5) 90° 1 1/2" Slip X 1 1/2"Slip PVC Plumbing Fitting. The 90° ELL receives a 1 1/2" fitting on each side which would measure 1 7/8" Inside Diameter. Any 2"  fitting (which measures 1 7/8" outside diameter) will...