Pumps and Related Parts

Pumps and Related Parts

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Complete Wet End, Aqua-Flo ,XP2, Xp2e,3.0HP, 2"x 2" , 48fr, fits Motors with 12.0A/230V This is a chart you can use to determine which Aqua-Flo version you have..
This is a 48 Frame Wet End. Measures about 3 5/8" between the bolt hole to determine which one you have.

    Complete Wet End, Aqua-Flo ,XP2, Xp2e,3.0HP, 2"x 2" , 48fr, fits Motors with 12.0A/230V

    HTPOFAmerica

    MSRP: $147.99
    $114.99
    This part is a Complete 3HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 48 frame wet end for XP2 pumps. This wet end is used with a 48 frame motor that would have about 12.0 Amps on High Speed on a 230V motor and...
    MSRP: $147.99
    $114.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $147.99
    $114.99
    Subtotal:
  • Garden Tub Pump,Bath,Waterway Genesis,5.5A,115v,1-1/2",w/Rubber Foot Pads Garden Tub Pump,Bath,Waterway Genesis,5.5A,115v,1-1/2",w/Rubber Foot Pads

    Garden Tub Pump,Bath,Waterway Genesis,5.5A,115v,1-1/2",w/Rubber Foot Pads

    Waterway Plastics

    MSRP: $217.80
    $169.40
    This pump is a Waterway Genesis Generation Energy Efficient Bath Pump 5.5 amps 115 Volts w/Air Switch The Plumbing connections are 1 1/2" on the Pressure and Suction sides which measure about 2 3/8" across the threads.. There are two barbed fittings on...
    MSRP: $217.80
    $169.40
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $217.80
    $169.40
    Subtotal:
  • Complete Wet End, Aqua-Flo ,XP2, 2.5HP, 2"x 2" , 48fr, fits Motors with 11.0A/230V 
The Suction and Pressure sides both Measure about 3" Across the threads! This is a chart you can use to determine which Aqua-Flo version you have..
This is a 48 Frame Wet End. Measures about 3 5/8" between the bolt hole to determine which one you have.

    Complete Wet End, Aqua-Flo ,XP2, Xp2e, 2.5HP, 2"x 2" , 48fr, fits Motors with 11.0A/230V

    HTPOFAmerica

    MSRP: $147.99
    $114.99
    This part is a Complete 2.5HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 48 frame wet end for XP2 pumps. This wet end is used with a 48 frame motor that would have about 11.0 Amps on High Speed on a 230V motor and not...
    MSRP: $147.99
    $114.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $147.99
    $114.99
    Subtotal:
  • Complete Wet End, Aqua-Flo ,XP2, Xp2e, 1.5HP, 2"x 2" , 48fr, fits Motors with 9.0A/230V 11.0A/115V Complete Wet End, Aqua-Flo ,XP2, Xp2e, 1.5HP, 2"x 2" , 48fr, fits Motors with 9.0A/230V 11.0A/115V

    Complete Wet End, Aqua-Flo ,XP2, Xp2e, 1.5HP, 2"x 2" , 48fr, fits Motors with 9.0A/230V 11.0A/115V

    HTPOFAmerica

    MSRP: $147.99
    $114.99
    This part is a Complete 1.5HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 48 frame wet end for XP2 pumps. This wet end is used with a 48 frame motor that would have about 9.0 Amps on High Speed on a 230V motor or 13.0...
    MSRP: $147.99
    $114.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $147.99
    $114.99
    Subtotal:
  • Waterway Spa Pump Wet End 2 1/2" X 2" 56 Fr 4 HP Executive A regular 2" pump union fitting measures about 3" edge to edge but this wet end is different on the front suction side and it measures about 3 5/8" edge to edge so be sure your wet end has a large suction side fitting before ordering this..

    Waterway Spa Pump Wet End 2 1/2" X 2" 56 Fr 4 HP Executive

    HTPOFAmerica

    MSRP: $158.97
    $109.99
    You are buying a 4 HP 56 Frame Waterway Executive 2 1/2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will...
    MSRP: $158.97
    $109.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $158.97
    $109.99
    Subtotal:
  • Complete Wet End, Aqua-Flo ,XP2, 2.0HP, 2"x 2" , 48fr, fits Motors with 10.0A/230V 16.0A/115V 
The Suction and Pressure sides both Measure about 3" Across the threads! This is a chart you can use to determine which Aqua-Flo version you have..

    Complete Wet End, Aqua-Flo ,XP2, Xp2e, 2.0HP, 2"x 2" , 48fr, fits Motors with 10.0A/230V 16.0A/115V

    HTPOFAmerica

    MSRP: $147.99
    $114.99
    This part is a Complete 2HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 48 frame wet end for XP2 pumps. This wet end is used with a 48 frame motor that would have about 10.0 Amps on High Speed on a 230V motor or 16.0...
    MSRP: $147.99
    $114.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $147.99
    $114.99
    Subtotal:
  • Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 4 HP Executive Wetend A 2" Threaded fitting measures about 3" edge to edge on the suction or pressure side..

    Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 4 HP Executive Wetend

    HTPOFAmerica

    MSRP: $158.97
    $109.99
    This part is a 4 HP 56 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...
    MSRP: $158.97
    $109.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $158.97
    $109.99
    Subtotal:
  • Wet End, Vico, Ultima, 1.0hp, 1-1/2" Thread that measures about 2 3/8" , 48 frame, with Heat Blanket Nipples Wet End, Vico, Ultima, 1.0hp, 1-1/2" Thread that measures about 2 3/8" , 48 frame, with Heat Blanket Nipples

    Wet End, Vico, Ultima, 1.0hp, 1-1/2" Thread that measures about 2 3/8" , 48 frame, with Heat Blanket Nipples

    HTPOFAmerica

    MSRP: $164.99
    $134.99
    This part is a Complete 1 1/2 HP 48 Frame Vico Wet End that is very unusual with the Heat Blanket Circulation Nipples.. It is 1 1/2" x 1 1/2" meaning it measures about 2 3/8" edge to edge on the threads.. Most wet end that look like this one measures 3"...
    MSRP: $164.99
    $134.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $164.99
    $134.99
    Subtotal:
  • Bath Pump Wet End, Aqua-Flo TMCP, 3/4HP, CD, 48-Frame, 1-1/2"MBT, (Self-Drain) Bath Pump Wet End, Aqua-Flo TMCP, 3/4HP, CD, 48-Frame, 1-1/2"MBT, (Self-Drain)

    Wetend, Bath Pump Wet End, Aqua-Flo TMCP, 3/4HP, CD, 48-Frame, 1-1/2"MBT, (Self-Drain)

    HTPOFAmerica

    MSRP: $149.99
    $104.99
    This Part is an 48 Frame 3/4HP TMCP Aqua-Flo Wet End for a Garden Tub Bath Pump that has a voltage of 115V and an Amperage of about 10-11 Amps..  Note: The outside measurement of the threads on this wet end are about 2 3/8" meaning the inside...
    MSRP: $149.99
    $104.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $149.99
    $104.99
    Subtotal:
  • Complete Wet End, Aqua-Flo ,XP2, Xp2e, 1.5HP, 2"x 2" , 56fr, fits Motors with 9.0A/230V 6.3"
The Suction and Pressure sides both Measure about 3" Across the threads! Complete Wet End, Aqua-Flo ,XP2, Xp2e, 1.5HP, 2"x 2" , 56fr, fits Motors with 9.0A/230V 6.3"
This XP2e Wet End  will measure about 5 3/16" between the thru-bolts in a cross pattern and 56 frame motor measures about 6 1/4" across the motor and will have 5/16" heads on the thru-bolts.

    Complete Wet End, Aqua-Flo ,XP2, Xp2e, 1.5HP, 2"x 2" , 56fr, fits Motors with 9.0A/230V 6.3"

    HTPOFAmerica

    MSRP: $147.99
    $114.99
    This part is a Complete XP2e 6.3” 1.5HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 56 frame wet end for XP2e pumps. This wet end is used with a 56 frame motor that would have about 9.0 Amps on High Speed on a 230V...
    MSRP: $147.99
    $114.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $147.99
    $114.99
    Subtotal:
  • Complete Wet End, Aqua-Flo ,XP2, Xp2e,3.0HP, 2"x 2" , 56fr, fits Motors with 12.0A/230V 6.3"
The Suction and Pressure sides both Measure about 3" Across the threads! Complete Wet End, Aqua-Flo ,XP2, Xp2e,3.0HP, 2"x 2" , 56fr, fits Motors with 12.0A/230V 6.3"
This XP2e Wet End  will measure about 5 3/16" between the thru-bolts in a cross pattern and 56 frame motor measures about 6 1/4" across the motor and will have 5/16" heads on the thru-bolts.

    Complete Wet End, Aqua-Flo ,XP2, Xp2e, 3.0HP, 2"x 2" , 56fr, fits Motors with 12.0A/230V 6.3"

    HTPOFAmerica

    MSRP: $147.99
    $114.99
    This part is a Complete XP2e 6.3” 3.0HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 56 frame wet end for XP2e pumps. This wet end is used with a 56 frame motor that would have about 12.0 Amps on High Speed on a...
    MSRP: $147.99
    $114.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $147.99
    $114.99
    Subtotal:
  • Complete Wet End, Aqua-Flo ,XP2, Xp2e,4.0HP, 2"x 2" , 48fr, fits Motors with 14.0A/230V This is a chart you can use to determine which Aqua-Flo version you have..
This is a 48 Frame Wet End. Measures about 3 5/8" between the bolt hole to determine which one you have.

    Complete Wet End, Aqua-Flo ,XP2, Xp2e,4.0HP, 2"x 2" , 48fr, fits Motors with 14.0A/230V

    HTPOFAmerica

    MSRP: $147.99
    $114.99
    This part is a Complete 4HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 48 frame wet end for XP2 pumps. This wet end is used with a 48 frame motor that would have about 14.0 Amps on High Speed on a 230V motor and...
    MSRP: $147.99
    $114.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $147.99
    $114.99
    Subtotal:
  • Total: items /

Adding your products to cart