Heaters and Related Parts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
European Flow Thru Element with Silicon and Gaskets, 3.0kW, 10", 115v/230v, Balboa M7 or Gecko
HTPofA
MSRP: $67.99$51.99This part is an European Flow Thru Element with (2) Gaskets and Silicone, 3.0kW, 10", 115v/230v, use in 15"x 2" Tubes on Balboa M7, Gecko and more.. Heater Application Brett Aqualine, Balboa, Gecko, HydroQuip Heater Element Type Flow...MSRP: $67.99$51.99 -
Heater Union Tailpiece Kit , 1-1/2"mbt x 1-1/2"slip, w/Split Nut & Gasket
HTPOFAmerica
MSRP: $19.99$14.99Heater Union Tailpiece Kit , 1-1/2"mbt x 1-1/2"slip, w/Split Nut & Gasket. The threaded side will measure about 2 3/8" Across and the slip side will measure about 1 7/8" Inside Diameter.. Heater Union Part Type Split Nut,...MSRP: $19.99$14.99 -
HI LIMIT: SPST Auto Reset (NO CAPILLARY) Surface Mount Style Sundance Smart Heaters , Cal Spa Wet Elements
HTPOFAmerica
MSRP: $44.99$34.99This Part is a Surface Mount Style HI LIMIT: Single Pole Single Throw THERMAL FUSE Auto Reset (With NO CAPILLARY)This Hi Limit Surface mount surface mounts to the heater in a spot where it can read what the actual water temperature is flowing through the...MSRP: $44.99$34.99 -
Flange Housing Gasket, 5" x 5"
Therm Products
$10.995"x 5"Flange ElementWelded construction most commonly used in plastic manifolds such as Brett Aqualine, Premier, Allstate, and Hot Water products. Dual 5/16" thermowells, studs for thermodisc, 1/8"npt pressure switch tap, hole for current collector bolt...$10.99 -
Heater Tube Threaded Plug, 1/8"mpt, Brass
HTPOFAmerica
MSRP: $7.98$4.98This item is a 1/8" MPT Brass Plug which can be used to block an 1/8" MPT (male Pipe Thread) hole normally found on a Heater Tube on Hot Tubs. This hole size is the same size as a Pressure Switch hole and would measure about 3/8" wide across the hole or...MSRP: $7.98$4.98 -
MSRP: $62.34$49.99
-
Jumper Strap, Balboa, Value, LE, Heater to Board, Qty of 2
HTPOFAmerica
MSRP: $18.99$14.99This part is a Jumper Strap Set of (2) Kit to connect the heater to the circuit board on Balboa LE and Value Systems. Measures 1-3/8" x 13/16" Circuit Board Application Balboa Water GroupCircuit Board Model LE, Value...MSRP: $18.99$14.99 -
Heater Tube Hole Plug, 1/8"mpt, Stainless Steel
Generic
$4.99This item is a 1/8" MPT Plug which can be used to block an 1/8" MPT (male Pipe Thread) hole normally found on a Heater Tube on Hot Tubs. This hole size is the same size as a Pressure Switch hole and would measure about 3/8" wide across the hole or the...$4.99 -
(F) Flow Thru Element, 4.0kW, M7, Generic, 115v/230v, Teflon Coated (Better)
Spa Components
MSRP: $84.99$64.99You are buying a 4.0KW Chemical Resistant DuPont Teflon® Coated Flow Thru Heater Element for 230V or 115V Applications that features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko, ACC, and most...MSRP: $84.99$64.99 -
MSRP: $50.31$39.13
-
MSRP: $19.99$14.99
-
Jumper Strap, Balboa, EL, VS, GL, GS, Heater to Board, Copper
HTPOFAmerica
MSRP: $23.99$18.99This Part is a Single Jumper Strap for a Balboa, EL, VS, GL or GS, Heater to Board connection.. This part is made from Copper.. Measures 2" x 13/16" Circuit Board Application Balboa Water GroupCircuit Board Model EL,...MSRP: $23.99$18.99