PVC Plumbing Fittings

This part is a 45° 2" Pump Union To Heater Connection Kit & Gasket. The Union glues into a 2" fitting on one side and then Screws to a 2" Wet End(Pump) Threaded Part on the other side. Then a street 45° PVC pipe runs...

This parts is a (1) 90° 2" Street X 2"Slip PVC Plumbing Fitting. The 90° ELL receives a 2" fitting on one side which would measure 2 3/8" Outside Diameter and then slips into a 2" fitting on the other side that would measure 2 3/8" Inside...

This part is a (2) 90° 2" Slip X 2"Slip PVC Plumbing Fitting. The 90° ELL receives a 2" fitting on each side which would measure 2 3/8". Any 2"  fitting (which measures 2 3/8" outside diameter) will glue into this fitting on both sides...

You are buying a 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes the split nut , (2) Screws, 2" Slip X 2" Threaded Union and a gasket for use with a 2" Heater Union. The Heater Flange Split Nut mounts to the heater tube...

You are Purchasing a 12" piece of Clear Tubing that is 1" OD , 3/4" ID. These Tubing is used for connecting some Water Manifolds, Water Control Valves and Waterfalls in Hot Tubs. We Offer this Tubing with other parts in kits we are offering in our...

Waterway 90 degree elbow with built in 5/16" thermowell for temp or hi-limit capillaries, sensors and probes. This elbow has 1-1/2" slip fittings that will measure 1-7/8" on the inside or each side. PVC Pipe Fitting Type Ell, 90 deg w/t-well Heater...

Tee, pvc1-1/2"s x 1-1/2"s x 1"s

This part is a Coupler which is 2-1/2" Slip x 2-1/2" Slip which would measure about 2 7/8" Inside Diameter.. PVC Pipe Fitting Type Coupling First Plumbing Connection Size 2-1/2" First Plumbing Connection Type Slip (s) Second Plumbing...