Topside Controls (Control Buttons)

This video is about The Spa Guy teaching you how to replace an Overlay on a Artesian K 73 topside. This process is the same for most topside brands... Save Save Save Save Save Save Save Save Save Save Save Save Save Save

In this Video The Spa Guy Repairs a Aqua-Flo XP2e pump that was leaking.. He replaces the seal and impeller and cleans the shaft up.. The bearing was not bad so no need to replace that.. Save Save Save Save Save Save Save Save Save Save Save Save Save...

This video is about The Spa Guy showing How To Diagnose a Master Spa with a Balboa MAS560 Board that has full power to the board but still does not operate.. it is a similar process on all brands... Save Save Save Save Save Save Save Save Save Save Save...

This part is a Balboa 8 Button Topside that is called a Balboa E8 with a Molex plug end. This means it is capable of having 8 buttons but you will find this sometimes with 6, 7 or 8 buttons... You will also find a similar size and shape and look topside...

This part is a 100 ft roll of Air Tubing 1/8" Inside Diameter is used with Air Buttons, Air Button Style Topsides and Air Switch Applications and between Garden Tub Pumps and Air Button Switches... Air Tubing Inside Diameter 1/8" Tubing Type Air ...

This part is (1) 1/8" X 1/8" Barbed Coupler that fits 1/8" OD , 3/16" ID Clear Hose on each side. These are used for connecting Clear Hoses together in Hot Tubs or pools and commonly used in Air Button Switch systems.

This Part is a Back Light Bulb for a Balboa Topsides only. You will need a Small Flat Screwdriver to remove and install this bulb. Note: Not all Balboa Topsides have a Back Light Bulb and some have more than one , so Check before you order. Know Before...

This TSC-8 or K-8 control panel will work with most SSPA and MSPA systems and is a direct replacement for K-16 , K-52 , K-8 , TSC-52 , TSC-8-GE2 as well as others, has 7 buttons including an Economy mode, and will control dual pumps and an air blower. It...

This part is an 11 button Gecko Aeware topside complete with a 10ft cord that is used in systems base on the IN.K600 part number.. Dimensions 4-1/4" x 8-11/16" With its stunning design, Aeware by Gecko's new in.k600 advanced control panel features a low...

In this video The Spa Guy shows actual voltage in the water on a hot tub and what caused it. a Missing ground on the GFCI box when the hot tub was wired!! Once again The Spa Guy Saves the Day!! Your Hot Tub Super Hero  #sparepair #hottubrepair...

This video is about The Spa Guy teaching you the basics of GFCI Hot Tub Wiring and the ins and outs of wiring a Hot Tub...  #sparepair #hottubrepair  #hottubhowto Save

This video is The Spa Guy teaching you how to Diagnose a New Wire Up Situation where you just wired your hot tub up and it is tripping the breaker and it is either a new tub or it is used and ran fine at the last location...... Save