PVC Plumbing Fittings

This Kit is a 1" Spin To Win Glue Kit for 1" Plumbing repairs where you are connecting old 1" Plumbing that measures about 1 1/4" OD to new plumbing.. The kit includes a 6" Piece of 1" Flex Pipe that measures about 1 1/4" OD and a 1" Coupler and (1) 4oz...

This item is a (6) Way Barbed Coupling used to couple 3/4" main hoses and 3/8" ID hose together. 3/4 Inch Barb X 3/4 Inch Barb through and (3) tees Barb Coupling 3/8" barb and 3/8" barb... This part is used on pump bleeder systems many time where the...

This Kit is a 1-1/2" Manifold Coupler Kit for 1-2 Manifolds. The Kit consists of (1) 1 1/2" Coupler, 1 1/2"Slip X 1 1/2"Slip (6") of 1 1/2" Flex Pipe, (1) 1/4 Pint of Christy's Red Hot Blue Glue and (1) 1/4 Pint of Christy's Purple Primer. The kit...

This Kit is a 1 1/2" Coupler and a 6" Piece of 1 1/2" Flex Pipe used when gluing new plumbing to old plumbing. We call this Technique "Spin it To Win it" Meaning you spin the coupler onto the old plumbing when you are gluing new to old and then purple...

"Magicmend" Pipe extenderSimply cut the bad fitting and remove it from the system. Glue the correct size Magicmend into place and replumb your new fitting  

You are buying on a 2" Slip X 2" Barb Adapter.. This adapter glues inside of a 2" PVC plumbing fitting and a 2" Inside Diameter Tube glues onto the barb..  This part is found in Strong Spas and some others I will list them as I find out...

You are buying an Air Bleeder Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug. This style set up is is usually found in Dimension One Hot Tubs in the Filter area and other brands as well.. Note; The plug is not sold...

Manifold Wye Full Description Features: 22.5 degree wye 1 inch slip X 1 inch slip X 1 inch slip The slip fitting on this part would measure about 1 1/4" Inside Diameter on each opening.. Improves performance Available in two different...

You are buying a (1) 45° 1 1/2" Slip X 1 1/2"Slip PVC Plumbing Fitting. The 45° ELL receives a 1 1/2" fitting on each side which would measure 1 7/8" Inside Diameter. Any 2"  fitting (which measures 1 7/8" outside diameter) will glue into...

This item is a (4) Way Barbed Coupling used to couple 3/8" ID hose together. 3/8 Inch Barb X 3/8 Inch Barb through and a tee Barb Coupling 3/8" barb and 3/8" barb... This part is used on pump bleeder systems many time where the bleeders are attached...

You are buying on a Renu Kit for 1" Street X (4) 3/4" Barbs manifold to be used to replace old manifolds with 1/2" glue in white pipes. The Manifold recieves a 1" pipe on the slip side which would measure about 1 1/4" inside...

You are buying on a 1" Street X (4) 3/4" Barbs manifold. The Manifold recieves a 1" pipe on the slip side which would measure about 1 1/4" inside Diameter and then glues inside of a slip on the street side on the other...