Retrofit ePACK Control Pack, (2) Pump, Ozone and 4.0kW, 115v or 230v 60hz

The ePACK is a universal replacement spa control system that features a water sensor instead of a pressure or flow switch so this pack will work plumbed in the pressure or suction side. Heater assembly is 15″ long, it is mounted to the back of the enclosure. This pack is designed to run either (1) Pump, (2) Pumps or (1) pump and (1) Blower, a Light and an ozonator as well. It can be wired 115v or 230V and it comes with a new cable for both pumps, a light and an ozonator.. The topside is 5 3/8" x 2 1/2" on the face and the hole size for the topside would be about 4 3/4" x 1 3/4".. If the hole you are trying to use the topside is is larger than this we offer blackout plates to take up the space.. 

If you need a blackout plate click here.. Adapter Blackout Plate, Hydro-Quip 8-1/2" x 3-1/2". For Eco-401 or Balboa E4 Duplex Topside

If you need your ePack to run Fiber Optic add this option.. Retrofit MODPACK Fiber Optic Option This is in Addition to a New Modpack purchase

The ePack controls a 2 speed primary pump, a single speed air blower or a single speed secondary pump, a 12 volt spa light, an auxiliary light  and an ozonator.  This system is convertible and may be run on 120 volts.

ACC ePack Spa Control with Spa Heater and Cords, for 1 spa pump, blower, light, and ozonator 230v or 115v changeable voltages. Includes topside Keypad, 2.5 x 5.5" and User's Manual, warranty card, with heater connections for 2" PVC pipe size, and power cords for your existing 2-speed pump (4-wire 40" cord), air blower (simple pigtail to splice to your existing air blower cord), light pigtail, and ozonator pigtail. Topside keypad has 57" long cable, and an optional extension cable is available.