Shop

This part is a (1) 90 Ell 1 1/2" Street X 1 1/2"Slip with an 1/8" FPT hole in the side.. The 90 ELL receives a 1 1/2" fitting on one side which would measure 1 7/8" OD and then slips into a 1 1/2" fitting on the other side that would measure 1 7/8" ID on...

This is a Kit that features (1) PS-200 Seal and (2) Bearings that fit most motors that are mated to Aqua-Flo Pump Wet Ends as well as Waterway " Viper" Wet Ends, The Professor silly Juice to seal the seal. This Seal is used in Most Aqua-Flo Wet Ends...

This part is a Bypass Valve Flap made by Waterway found inside of In-Line, Top Load, Top Mount, Front Access, 2" Filter Housings... You will find these in several colors and they will have the numbers 602-5101 or 601-5111 on the valve in most cases....

This part is a 2" Slip x 2" Street 90 Elbow w/thermowell fitting, 5/16" t-well, 90° ell pvc... The 2" fitting measure about 2 3/8" ID on the slip side and 2 3/8" OD on the street side..   PVC Pipe Fitting Type Ell, 90 deg w/t-well Heater...

This Part is a Fine Thread Bleeder Plug for a 48 or 56 Frame Watkins Vendor Code 3536 LX Pump Wet End.

This part is a Wear Ring that only fits Watkins LX Vendor Code 3536 Impellers for a 48 or 56 Frame Pump Wet Ends and measures 3/4" thick from front to back... LX Pumps..  

This Part is a Wet End O-Ring for a 48 or 56 Frame Face Plate for a Watkins Vendor Code 3536 Intertek Brand Pump Wet End only..It is about 6 3/8"" Inside Diameter and about 1/8" Thick..      ...

This part is an O-Ring that fits a Watkins Wavemaster 7000 Vendor Code 0108 only wet end..   6" ID, 1/8" X Section Square.. The Watkins pump this fits looks like this:  

This part is a Kit that features (2) Seal, (1) Bearing, Seal Tool and Silicon that fit a Watkins, Piranha, Vendor Code 0108, 1.65hp, Wavemaster 7000. To Install you should put silicone sealant on the back of the Metal part and gently push it into place...

This part is a Kit that features (1) Seal, (1) Bearing, Seal Tool and Silicon that fit a Watkins, Piranha, Vendor Code 0108, 1.65hp, Wavemaster 7000. To Install you should put silicone sealant on the back of the Metal part and gently push it into place...

This part is a Kit that features (1) Seal, Seal Tool and Silicon that fit Pump Seal Kit with Silicon , that fits a Watkins, Piranha, Vendor Code 0108, 1.65hp, Wavemaster 7000. To Install you should put silicone sealant on the back of the Metal part and...

This 1.65HP Impeller fits a Watkins Vendor Code 0108 Wet End.. It can be found under the Name Wavemaster 7000 on Hot Spring, Caldera, Tiger River, Solana or Hot Spot tubs... You need to look at the face to determine if this is your Wet End.. Closed face...