Shop

This part is a Valve Stem Gate Only that is found inside of a CMP Brand Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve Gate made by CMP.. If you need the complete valves and other parts that fit this...

This part is a Gray Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by CMP, the plumbing connects are 1" Slip x 1" Slip Single Port.. To connect the valve to 1" plumbing simply glue inside of each...

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it mounts to.. The 48 Frame version measures 3 5/8" in a...

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it mounts to.. The 48 Frame version measures 3 5/8" in a...

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it mounts to.. The 48 Frame version measures 3 5/8" in a...

This part is a Generic Overlay for a K-85 Topside that features 7 buttons (2) pumps, (1) Light, Temp Up & Down, Flter and Econo.. The dimensions of the topside it fits is Dimensions 8-1/8" X 3 11/16"...  Manufacturer Gecko, Aeware, Model...

This Catalina Filter is a 40 Square Foot Filter Cartridge that is 6" Outside Diameter x 8 1/4" in Length. It has a 1 1/2" SAE Threaded Fitting which is a Thick Thread that measures about 2" outside diameter of the threads. SAE Threads are really thick...

This item is a Replacement Waterfall Control 2 1/2" White Cap for a 1 1/2" Waterfall or Neck Jet Control found on Jacuzzi Premium and other brands.. This cap measures about 2 1/2" Edge to Edge and the center hole is about 1"..   For the Cap...

This item is a Replacement Waterfall Control 2 1/2" Gray Knob for a 1 1/2" Waterfall or Neck Jet Control found on Jacuzzi Premium and other brands.. This Knob measures about 3 1/8" Edge to Edge and the center Square hole is about 1/2"..   ...

Vico Ultimax Pump ImpellerClosed face impeller made for the Ultimax spa pump by Vico. Rated at 1.5hp,which would be 8-9.0 Amps.. it is used in an Ultimax pump wet end, and must be installed on a 1.5hp (or greater) thru bolt motor.  Click here for...

This part is a Slice, Gate Valve, Waterway, 2-1/2" Slip x 2-1/2" Spigot, Coast Spas and Others... The OD of the Street Spigot side measures about 2 7/8" and the ID of the Slip side measures about 2 7/8"..   This is a very unusual valve and an odd...

This part is no longer available.. This part is a 5 pin Male side Amp connector 20 Amp . This part is normally found on the Cord side that would come from a pump or blower or other accessory. Note: You will need a pin tool to replace this part to...