Shop

In this video The Spa Guy shows you how to use a Grundfos Circulation Pump in place of a Laing Circulation Pump... The Spa Guy feels the Grundfos is a better pump and i less money.. Save Save Save Save Save Save Save Save Save Save Save Save Save Save...

In this Video the Spa Guy show you how to install a 200 seal in an Aqua-Flo Wet End.. This is the seal only version... For the full version look in The Spa Guy's How To Video Library... Save Save Save Save Save Save Save Save Save Save Save Save Save...

In this Video The Spa Guy Repairs a Aqua-Flo XP2e pump that was leaking.. He replaces the seal and impeller and cleans the shaft up.. The bearing was not bad so no need to replace that.. Save Save Save Save Save Save Save Save Save Save Save Save Save...

This video is about The Spa Guy showing How To Diagnose a Master Spa with a Balboa MAS560 Board that has full power to the board but still does not operate.. it is a similar process on all brands... Save Save Save Save Save Save Save Save Save Save Save...

Potter&BrumfieldT-92 series relays rated at 30A and are available in various actions and coil voltages. Many manufacturers are replacing large power relays with the space saving T-92 relay. Dimensions are 2-3/4" x 1-1/2" x 1-3/8" ActionCoilAmps ...

Vico/Balboa Ultimax Pump ImpellerClosed face impeller made for the Ultimax spa pump by Vico/Balboa. Rated at 2.0hp,which would be 8-10.0 Amps.. it is used in an Ultimax pump wet end, and must be installed on a 2.0hp (or greater) thru bolt motor. ...

Waterway Iron Might Circulation Pump Impeller for 1/8HP Pump Closed face impeller made for the Iron Might pump by Waterway Plastics. Rated at 1/8hp, it is used in a Waterway Iron Might pump wet end.  This impeller is rated at 1/2hp. When...

This Part is a Gray 2 5/8" Face Width Replacement Knob for Waterway, Hydro-Air or CMP Brand Waterfall Control Valves.. The Bottom Accepts a 5/8" wide Square Stem and we offer these in Black, Gray and White.. See the link below..  Knob,...

This filter is 13 1/16" Tall X 5" Wide and has a female SAE Large Thick Thread that is 2" which would really measure about 2 1/4-2 3/8" ID. This filter can be found on some American Spa and Four Winds brand tubs.. Diameter  ...

This part is (1) Multibody 1 3/8" Face Width Air Injector in White. This air injector requires a .60" hole size and comes with a small gasket , retaining nut and three different barb adapters to suit multiple plumbing scenarios. The adapters come in a...

This part is a Male Pipe Fitting, Adapter, 1" Slip x 1" Threaded.. The OD of the pipe that glues into this is about 1 1/4".. PVC Pipe Fitting Type Male Pipe Adapter First Plumbing Connection Size 1" First Plumbing Connection Type Slip (s) Second...