Shop

This Kit is an 1HP Impeller for an Executive 48 Frame Wet End up to 1HP Motor and a 56 Frame Wet End 1HP Motor. This Impeller fits between the Face and the Volute of an Executive Wet End. I would advise replacing the Seal when you replace...

This part is a 5 Position 50 Amp Terminal Block found in Balboa Lite Leader Packs and some others..  Terminal Type    Terminal BlockTerminal Style    Terminal Block/StripNumber of Connections    5Terminal...

Waterway 90 degree elbow with built in 5/16" thermowell for temp or hi-limit capillaries, sensors and probes. This elbow has 1-1/2" slip fittings that will measure 1-7/8" on the inside or each side. PVC Pipe Fitting Type Ell, 90 deg w/t-well Heater...

This part is a 2HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0122 cast into the back and will measure about 3 3/4" wide with an eye width of 1 1 3/4" and a vane width of 1/2".. This can be found on motors with...

This part is a Complete Flo-Master FMCP 1.5HP Aqua-Flo 1-1/2" x 1-1/2" ( Which measures about 2 3/8" Across the Threads) Center discharge 48 frame wet end for 48FR pumps. This wet end is used with a 48 frame motor that would have about 9.0 Amps on High...

Start Capacitor1-7/16"dia x 2-3/4"hgt

This Filter Cartridge is an Antimicrobial VersionMicroban¨ antimicrobial agent is impregnated into the fibers of the filter media, resulting in a bluish color and allowing the antimicrobial agent to be released over the entire life of the filter.

Tee, pvc1-1/2"s x 1-1/2"s x 1"s