Shop

This sensor is no longer available.. Temperature Sensor

Vico/Balboa Ultimax Pump ImpellerClosed face impeller made for the Ultimax spa pump by Vico/Balboa. Rated at 4.0hp, it is used in an Ultimax pump wet end, and must be installed on a 4.0hp (or greater) thru bolt motor. Click the below links for the seals,...

This part is a Wear Ring measures 2 5/8" inside Diameter and fits all Aqua-Flo XP2e and Xp3 Impellers except the 3.0HP Xp2e Impeller... The Odd 3.0HP Impeller requires a different Wear Ring which measures 2 3/8" Inside Diameter.. Look at the chart in...

This part is a Filter Cartridge,  7 3/8" Long x 8" Across 4" Hole Master Spa & Down East 2004+. This filter is 7 3/8" long x 8" Wide and it has a top hole that is 4". The overall length of this housing is about 7 3/8". The top hole size is about...

This part is a Large high volume cone shaped bellows Brown in Color... Especially suited for latching air sensors and mechanical sequencing switches. Shipped w/nutMounting hole 7/8" This link is to the same style switch in Beige: Beige, PT1,...

Can be cut into multiple manifolds (2, 4, or 6-ports) utilizes 3/4"&3/8" clear vinyl tubing manifold comes with 2 plugs

This Manifold is  1 1/2" input which measures 1 7/8" Inside Diameter x (4) 1/2" outputs that measure 3/4" Inside Diameter.  Note: These manifolds are new old stock so they will not be perfect aesthetically...   Barb/Port Size 1/2"...

ThermostatsSingle pole rated at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This is a safety device! If it is found to be out of...

You are buying a 1"FTB X 1" Slip Pump Union with O-ring that matches the Union. The Union receives a 1" Inside Diameter which measures about 1 1/4" on the outside pipe or fitting on one side and then Screws to a 1" Wetend (Pump)...