This part is aSWIM56-15 5 Horse Power 56 Frame Pump Wet End fits Power-Rite Guangdong LX Brand SWIM56-15 Pump Motors only. These pumps usually have the part number Swim56-15 on the label.Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 8" across the face of the pump, it measures about 9" from the bottom to the top of the pressure side of the volute, it also measures 5 3/8" from the back to front edge. The Suction and Pressure side thread fittings are called 2 1/2" x 2 1/2" but measure 3 5/8" from the edge of the thread to the edge of the thread. NOTE: This Wet End looks a lot like an Aqua-Flo XP3and a Waterway Viper Wet End but they do not interchange!
To Install this wet end you will have to loosen the thru bolts and unscrew the impeller. There are time where you will have to disassemble the motor in order to loosen the impeller because they get stuck when they leak. Note: We offer parts for this wet end and complete pumps in our store.
1000, VG-1000, USSPS1000B, 5250-106, AS-1000, 071734S, PS-1000,319-3100B,waterway, executive, hiflo, hi-flo, wet end, wet end, spa wet end seal , hot tub wet end seal, 1000 seal, p-1000 seal, ps-1000 seal, p 1000 seal, ps 1000 seal
Visit our Store as we also offer these and other associated products and accessories for your Spa.
Please note: When you have a seal leaking in most cases you will need an impeller because the leak caused water to get into the metal shaft area that the impeller is screwed onto and expands and damages the impeller. We offer the impellers along with the seal in a kit in our store. Watch the video above for how to install the seal and other repairs for this pump as well.
This 5.0 Horse Power 15.0/5.0 Amp (2) Speed 2 1/2" x 2 1/2" 56 Frame Complete Pump is a Intertek LX Brand Pump. These pumps usually have the part number Swim56-15, WUA-500-II, WP-500-II or...
Waterway Viper Complete 3HP Wet End fits on a Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads... If you don't need a complete wet end a list of...
Waterway Viper Complete 5HP Wet End fits on a Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads... If you don't need a complete wet end a list of...
