Shop
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Filter, Cartridge, 25sqft, 2-1/8"ot, 2-1/8"ob, 4-15/16",13-5/16" 4oz
Horizon Series by Filbur
MSRP: $46.86$36.99MSRP: $46.86$36.99 -
Basket, Skimmer, OEM Waterway Dyna-Flo T/M Low Profile, Gray
HTPOFAmerica
MSRP: $54.99$44.99This part is no longer available in Gray.. We do offer it in Black here: Basket, Skimmer, OEM Waterway Dyna-Flo T/M Low Profile, Black This item is a Waterway Top load style filter basket in Gray see specs below for sizing.. Basket...MSRP: $54.99$44.99Qty in Cart: 0Quantity:Price:MSRP: $54.99$44.99Subtotal: -
MSRP: $7.06$5.49 -
Spa Drain and Fill Valve, Waterway, 1-5/8" ACME Thread x 1" Slip, Black
HTPOFAmerica
MSRP: $34.99$24.99This part is a Spa Drain and Fill Valve, Waterway, 1-5/8" ACME Thread x 1" Slip Black 1-3/8" Hole size.. Drain Valve Complete Drain Valve AssemblyHole Size 1", 1-3/8"Hole Size Fitting Type ACME...MSRP: $34.99$24.99 -
Pump Motor Base, Rubber, 48 & 56 Frame, Vibration Dampener
HTPOFAmerica
MSRP: $14.99$11.99You are purchasing a Rubber Pump Motor Base Vibration Dampener for 48 and 56 frame pumps. This motor base mounting pad fits under any 48 frame pumps, and under most 56 frame motors and pumps with industry standard bases. Pad cushions the motor to reduce...MSRP: $14.99$11.99 -
Impeller, Waterway, HiFlo, Side Discharge, 3/4hp Hi-Flo, Hi Flo
HTPOFAmerica
MSRP: $46.99$37.99This item is a 3/4HP Waterway HiFlo Pump Impeller "B".. If Your motor is 115V the amperage would be about 11 Amp if 230V it would be about 7 amps..Closed face impeller made for the Hi-Flo side discharge pump by Waterway Plastics. Rated at...MSRP: $46.99$37.99 -
Air Ctrl, BWG/HAI Std, 1-3/4"hs, 2-5/8"fd, Crescent, Wht, 1"
HydroAir/Balboa
MSRP: $34.03$26.99Top Draw Air ControlAvailable in 1" or 1/2 " modelsHole size 1-3/4"MSRP: $34.03$26.99 -
Impeller, Vico, Ultima, Ultra Jet, Flo,4.0hp,Black/Green/Red
HTPOFAmerica
MSRP: $39.99$34.99Vico Ultima Ultra Flo or Ultra Jet Pump ImpellerClosed face impeller made for the Ultima and Ultra Flo spa pumps by Vico. Rated at 4.0hp,which is between 12 and 14 Amps.. it is used in an Ultima, Ultra Jet and/or Ultra Flo pump wet end, and must be...MSRP: $39.99$34.99 -
_LG__73146__84866.1630829591.jpg?c=2 "Pump, Power Right, PRC504, 2.5ohp/5.0spl, 2spd, 56fr, 2\" Discontinued")
Pump, Power Right, PRC504, 2.5ohp/5.0spl, 2spd, 56fr, 2" Discontinued
Power - Right
MSRP: $727.83$566.09NOTE: THIS PUMP HAS BEEN DISCONTINUED DUE TO IT BEING A PEICE OF JUNK!! The replacements for this pump are 34-402-5252 or 34-402-5250 Complete Pump Type Portable Spa Pump Speed 2 Speed (2-Spd) Motor...MSRP: $727.83$566.09Qty in Cart: 0Quantity:Price:MSRP: $727.83$566.09Subtotal: -
Heater Tube Threaded Plug, 1/8"mpt, Brass
HTPOFAmerica
MSRP: $7.98$4.98This item is a 1/8" MPT Brass Plug which can be used to block an 1/8" MPT (male Pipe Thread) hole normally found on a Heater Tube on Hot Tubs. This hole size is the same size as a Pressure Switch hole and would measure about 3/8" wide across the hole or...MSRP: $7.98$4.98 -
_LG__12053__97766.1630829589.jpg?c=2 "Impeller, Aqua-Flo, XP2E, 2.0HP for (230V) 10 Amps or (115V) 16 Amps Eye Diameter 2 5/8\"")
_LG__89982__72363.1630829589.jpg?c=2 "Impeller, Aqua-Flo, XP2E, 2.0HP for (230V) 10 Amps or (115V) 16 Amps Eye Diameter 2 5/8\"")
Impeller, Aqua-Flo, XP2E, 2.0HP for (230V) 10 Amps or (115V) 16 Amps Eye Diameter 2 5/8"
HTPOFAmerica
MSRP: $44.74$34.99This part is an Aqua-Flo XP2 Impeller for a 2.0HP Motor which would have an Amperage Rating of about 10.0Amps on High Speed at 230V and 16.0 Amps on High Speed at 115V... It will also be a 56Frame motor which would have a 5/16" head on the through bolts...MSRP: $44.74$34.99 -
_LG__82156__33648.1630829587.jpg?c=2 "Check Valve, Magic Plastics Smart Check, 2\"s, 1/2 lb, Water")
Check Valve, Magic Plastics Smart Check, 2"s, 1/2 lb, Water
Magic Plastics
MSRP: $45.69$35.53The "Smart" Check is equipped with a 1/2Ó lb spring-loaded gate mechanism, allowing the valve to be installed in virtually any orientation.MSRP: $45.69$35.53