Heaters and Related Parts

This part is a 15" Heater Tube with a 4.0KW Heater in it that is found in some Sundance 680 Series tubs and some Sweetwater & Del Sol tubs as well with a High Flow .. For other parts related to this heater Click the links: Pressure Switch 1/8" mpt 1...

This part is a 15" Heater Tube with a 5.5KW Heater in it that is found in some Sundance680 Series Tubs and some Sweetwater tubs as well with a High Flow .. For other parts related to this heater Click the links: Pressure Switch 1/8" mpt 1 Amp Hot Tub Spa...

This part is a 90° Heater Assembly, Brett Aqualine, Plastic Manifold, 5.5kW, 230V, w/Hi-Limit, Thermostat, P-Switch.. Heater Type - Square Flange Wattage - 5.5kW, Voltage - 230V Heater Dimensions - 1-1/2" spigot x 14-1/4" long Heater...

This part is a 90° Heater Assembly, Brett Aqualine, Plastic Manifold, 5.5kW, 230V, w/Hi-Limit, P-Switch and Assorted Plumbing Fittings.. Heater Type - Square Flange Wattage - 5.5kW, Voltage - 230V Heater Dimensions - 1-1/2" spigot x...

This part is a United Spas Stainless steel 5.5kW/230v, 2" x 13-1/4" replacement flow thru heater assembly. Has a pressure switch tap, external thermal well, (2) mounting studs & (2) 2" pvc tailpieces with o-rings. Therm Products C2550-1206...

This is a Universal Low Flow Spa replacement heater that can be used in place of any Low Flow with the included kit or in some cases a little bit of additional tubing and fittings: Heater Application Universal Lo Flo Kilowatts 5.5kW Low Flow...

Applied Computer ControlsStainless steel flo-thru replacement heater assembly. Measures 12-1/2" x 2" and has (2) mounting studs, pressure switch tap at 0 degrees from the heater terminals, external thermowell and a 5.5kW element. Commonly found on the...

This Parts is a NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring until you...

Balboa Water GroupStainless steel replacement heater assembly, 5.5kW/230v, 2" x 15". Includes a pressure switch, Hi Limit Sensor on the right side. Made for Balboa Value and Balboa LE control systems. Housing Configuration  ...

This part is a 2" Center to Center O-Ring that fits some 1 1/2" Pump Unions that features a 2" groove. The O-Ring is 2" center to center and fits Magic Plastics 2" pump unions but there are exceptions which normally would be a 2 1/8" center to...

This part is a Single of Jumper Wire that would go from a standard heater element Electrode Tab to the board Relay Spade Connector.. Loop for the heater side to female spade.. These can be used on 4.0kw to 5.5kw elements.. Circuit Board...

This part is a Set of Jumper Wires that would go from a standard heater element Electrode Tab to the board Relay Spade Connector.. Loop for the heater side to female spade.. These can be used on 4.0kw to 5.5kw elements.. Circuit Board...