Complete Heaters

Balboa Water GroupStainless steel replacement complete heater assembly, 5.5kW/1.375kW ,230v or 115v, this tube measures  2" Inside Diameter and the overall tube length is 15" not counting the split nuts. This heater includes M7 sensors, tailpieces,...

This part is a Heater, FloThru, Universal Fit, 15" x 2", 230v, 4.0kW..  This heater will work in place of the following heaters: 1563-08 , 20-00245 , 20-00317 , 20-00318 , 20-00319 , 20-00324 , 20-00433 , 20-00434 , 20-00454 , 26-0034 , 26-0036-R1C...

Aftermarket Replacement for Cal Spa XL Exchanger This heater assembly is not an exchanger but an in-line flow thru replacement. This heater assembly is designed as a drop-in replacement. 2" x 15"s/s housing with 2" slip tailpieces

Flow Thru Heater Assembly used in Sundance Spas, and Spa Builders, and Pinnacle Spa Controls Stainless steel 2-1/4" x 15" with 5.5kW/240v, 1/8"npt pressure switch tap, (2) 2" socket tail piece, (2) 10-32 x 3/8" mounting stud

This Vita Spa Heater is obsolete and has been replaced by this heater: Heater, Flo Thru, Vita Spa, Replacement, 17-3/4" x 2", 230v, 5.5kW, Generation 2, DM Industries Vita/DM SpasStainless steel 4.5kW/230v, 2" x 17-5/8" flow thru replacement heater...

Brett Aqualine EM100, EM190Also used in Hydro-Quip pre-1997 packs. 15" heater manifold assembly includes 5.5kW/240v element. Stainless steel manifold has top indent grooves and a 1/8"npt pressure switch tap. Shipped with 2" tailpiecesAlso used in ACURA /...

You are buying a Complete Replacement 4.0KW Heater Assembly that fits a Gecko SSPA or Spa Builders Pack. This Heater Assembly includes the Tub, Element, Pressure Switch, Split nuts and Gaskets. NOTE: If you have the old style SSPA board with the...

Stainless steel aftermarket replacement heater assembly that fits systems that use dual sensor technology. 2" x 15" with two thd taps for the sensor assembly rated at 5.5kW/240v. Replacement sensors sold separately.

This part is a complete Heater, Flo Thru, Balboa M7, 800, 825, 15" x 2", 230v or 115v , 4.0kW, with Sensors..  This heater tube has a stud on the top and bottom make sure yours has them too.. This heater DOES include m7 sensors and split nuts, but...

This part is aflow-thru style is used on the 2006-forward Solana TX (triangle spa), RX (round) & SX (square) as well as the 2006-forward Hot Spot models except the Sprint and Dash. 15” length 4.0kWgrounding and mounting studsTemp Sensor or High...

Heater, FloThru, Watkins TR, 15" x 2", 4.0kW, 230v, Generic Note: This heater does not have a Pressure Switch port or studs for the ground bar..   Housing Configuration    StraightHeater Length    15"Lead End Terminal...

This Part is a Retrofit Heater tube to replace the original Cal Spa, Emerald of Polynesian 15 3/4" x 1 1/2" Heater and tube.. includes Tube, Element, Split nuts and Gaskets along with the 1 1/2" to 2" conversion fittings. This generic hot tub heater is...