Shop

Applied Computer ControlsStainless steel flo-thru replacement heater assembly. Measures 12-1/2" x 2" and has (2) mounting studs, pressure switch tap at 0 degrees from the heater terminals, external thermowell and a 5.5kW element. Commonly found on the...

You are buying a 2 HP 56 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...

This part is a Complete Wavemaster 5000 1.0HP Wet End 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. Vendor Code 4081   The below List is other parts related to this...

This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 3.0HP impeller which would fit a motor that has 10.0-12.0 amps at 230V and there are no 115V motors this fits.. Pump to Motor...

This part is a Sta-Rite Dura-Jet Complete 2" X 2" Wet End that fits both 48 or 56 frame motors and would fit a 230V Pump that is 8.0 Amps or a 115V pump that is 12.0 Amps.. The 2" fitting actually measures about 3" Edge to Edge across the threads.. It...

This part is a 4 Button, VL401 LCD Topside, E4, Balboa, Lite Duplex Digital, (1) Pump (1) Blower, Temp, Light... This Topside is used with Valve, SUV, VS500, VS501 and more systems.. The required hole size is about 2 1/4"x 6 3/8"....

This part is a 4 Button, ECO401 LCD Topside, E4, Balboa, Lite Duplex Digital, (1) Pump (1) Blower, Temp, Light... This Topside is used with Valve, SUV, VS500, VS501 and more systems.. The required hole size is about 2 1/4"x 6 3/8"....

Waterway Hi-Flo Wet EndSide discharge, 2"mbt suction/discharge, 48 frame wet end for the Waterway Hi-Flo pump. This wet end is used with a 11.0 Amp 2.0hp, 48 frame, thru-bolt style motor. The motor used may be either a single or dual speed. The wet end...

This Wet End is a 2" x 2" 1.5HP 48 or 56 frame Ultimax Vico® that would normally be found an a 230V pump with 9.0 Amps High speed or 14.0 Amps at 115v..  This side discharge, 2" x 2" mbt which would measure about 3" edge to edge on the threads,...

This part is a Temperature and Hi-Limit Sensor that fits some ACC SmartTouch control systems there is one sensor bulb is 1/4" Diameter and it uses (2) 2-pin connectors.. Fits most ACC Smartouch and Epack control systems regardless of year.

This part is a DEL SpaEclipse Gen 2, CD, 115v/230v, Mini Molded Cord, J&J Plug End Ozonator.. Features:Water Back Flow ResistantAuto Voltage Sensing100-250V / 50-60 HzConsistent Ozone OutputOzone LED Indicator LightUnsurpassed Cell Life...

This part is a Hydro Quip Silver B Series Flo Thru Heater this 2-1/4" x 15", 5.5kw, used in the Remote Slide Versi Heat Type heater.. This heater does not come with the box and other related parts you would transfer them form your original heater..