Shop

This is a 2.5HP Impeller with a 2 1/8" Eye width and 5/16" Vane width and 4" OD for anAqua-Flo 48 or 56 Frame Wet End 2.5HP Motor that is about 11.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an Aqua-Flo XP2 or FMXP2 Wet...

You are buying a (1) 90° 1 1/2" Slip X 1 1/2"Slip PVC Plumbing Fitting. The 90° ELL receives a 1 1/2" fitting on each side which would measure 1 7/8" Inside Diameter. Any 2"  fitting (which measures 1 7/8" outside diameter) will glue into...

This part is a 90 Elbow, Sweep, 1-1/2" Slip x 1-1/2" Slip.. It will receive a pipe or fitting that measures about 1 7/8" Outside Diameter on both ends..  Air Blower Fitting Type Sweep Air Blower Part Type Sweeps PVC Pipe Fitting...

This part is a 31" AMP Style 4 Wire Cord With Male Plug that is used on a 2 speed pump.. The Wire colors are as follow on most systems: Red=High Speed Black=Low Speed White=Neutral or Common Green=Ground There are exceptions to these colors versus speed...

Temperature Sensor This sensor is used with Some Jacuzzi Premium Hot Tubs and the following Sundance systems: 1992 Suncoast, 1996-98 Suntub, 1997-2005 400, 600, 600-S, 750, 800, 1997 850, and 2005+ 880 series Usually this Temp Sensor is bad when it gives...

"Magicmend" Pipe extenderSimply cut the bad fitting and remove it from the system. Glue the correct size Magicmend into place and replumb your new fitting

Sundance Jacuzzi Flow SwitchWith transparent tee fitting; fits all 6/99- present 1-pump systems (except 2001–present Capri) 2 Barbed with Box End Connectors without PlugAdditional Details:-Flow Switch with Transparent Tee Fitting-SPST Contact...

For a video about this part search YouTube for: Hot Tub Spa Parts Heater Union 2" X 1 1/2" Slip Information The Hot Tub Professor   You are buying a 1 1/2" Slip X 2" Heater Union Only...