Description
Genuine replacement impeller designed for Aqua-Flo XP2 and FMXP2 wet end assemblies. This 2.5 horsepower impeller features precise dimensions: 2 1/8 inch eye diameter, 3/8 inch vane width, and 4 3/8 inch outer diameter. Compatible with 48 or 56 frame wet ends paired with motors drawing approximately 11.0 amps at high speed on 230V systems.
Critical Specifications:
- Eye Width: 2 1/8 inches
- Vane Width: 3/8 inch (note: some systems use 5/16 inch)
- Outer Diameter: 4 3/8 inches
- Power Rating: 2.5 HP
- Amperage: Approximately 11.0A high speed (230V) or 8.0A (115V systems show 11-12A)
- Part Numbers: 91694150, 91694151
Installation Guidelines: This component mounts between the face plate and volute housing of your Aqua-Flo wet end assembly. We strongly recommend installing a fresh PS-200 seal simultaneously with impeller replacement for optimal performance and longevity.
Frame Compatibility: Works with both 48 and 56 frame configurations. Identify your frame size by measuring motor through-bolt spacing: 48 frame measures 3 5/8 inches between bolts (5 3/16 inches diagonal X-pattern, 1/4 inch bolt head); 56 frame measures 4 1/8 inches between bolts (5 3/4 inches diagonal X-pattern, 5/16 inch bolt head).
Important Selection Warning: Always match the impeller horsepower rating to your existing motor specifications. Installing an oversized impeller will cause motor overheating and potential damage during high-speed operation. Reference your motor's amp draw at high speed to confirm correct horsepower rating before ordering.
Please verify all measurements and part numbers carefully before purchase, as this precision component is non-returnable.
