Shop

Flow Thru Heater Assembly used in Sundance Spas, and Spa Builders, and Pinnacle Spa Controls Stainless steel 2-1/4" x 15" with 5.5kW/240v, 1/8"npt pressure switch tap, (2) 2" socket tail piece, (2) 10-32 x 3/8" mounting stud

This Vita Spa Heater is obsolete and has been replaced by this heater: Heater, Flo Thru, Vita Spa, Replacement, 17-3/4" x 2", 230v, 5.5kW, Generation 2, DM Industries Vita/DM SpasStainless steel 4.5kW/230v, 2" x 17-5/8" flow thru replacement heater...

Rainbow RTL-25, model R172502 is a 1-1/2"s top load filter. For use on portable spas, it is designed to mount in a niche so that the main body is under the shell of the spa, while the top is accessed from above the spa. This complete filter includes a...

Brett Aqualine EM100, EM190Also used in Hydro-Quip pre-1997 packs. 15" heater manifold assembly includes 5.5kW/240v element. Stainless steel manifold has top indent grooves and a 1/8"npt pressure switch tap. Shipped with 2" tailpiecesAlso used in ACURA /...

Replacement Part for the Front Load Skim filter

The Waterway center discharge wet end has been discontinued and replaced with the E-Series Center Discharge wet end by the manufacturer. Please be sure which wet end you have as the parts are not interchangeable. The easiest way to identify which wet end...

This Wet End is a 2" x 2" 2.0HP 48 or 56 frame Ultimax Vico® that would normally be found an a 230V pump with 10.0 Amps High speed or 16.0 Amps at 115v..  This side discharge, 2" x 2" mbt which would measure about 3" edge to edge on the threads,...

This part is a Complete Verticle Mount Style FMVP 1.0HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Adjustable Suction Side discharge 48 frame wet end for FMVP pumps only. This wet end is used with a 48 frame motor that...

This part is a Power Cord, 20A, 15ft, GFCI, for 115v Plug N Play Hot Tubs..  Note: This is NOT a Right Angle GFCI Plug and the flat spades are opposite so this will only fit a 20 Amp Wall Plug that accept the horizontal vertical style spades....

Temperature SensorFor 6100, 8400, 8600, 9400, & 9600 Series Systems

This Wet End is a 2" x 2" 4.0HP 48 or 56 frame Ultimax Vico® that would normally be found an a 230V pump with 14.0 Amps High speed there are no 115v versions of this wet end..  This side discharge, 2" x 2" mbt which would measure about 3" edge...