Shop

T90 Style Circuit Board RelayCircuit board mounted, available in various coil voltages. Use to complete simple circuit board repairActionCoilAmpsSPST12 VDC30amp

This part is an Air Injector, Galaxy, Stainless, 3/8" barb, Garden Tub...  Hole Size    5/8"Face Diameter    1-5/8"Manufacturer    Custom Molded ProductsColor    Stainless

This part is a 2.5HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0123 cast into the back and will measure about 3 3/4" wide with an eye width of 1 3/4" and a vane width of 1/2".. This can be found on motors with...

120 Wye, 2" Slip x 2" Slip x 2" Slip     Each of these Slip Fittings accept a 2" Pipe or fitting that would measure about 2 3/8" Outside Diameter.. (PVC) Plastic Pipe Fittings, Sch 40.   PVC Pipe Fitting Type Wye, 120 deg ...

This is a Thermcore Plastic replacement sleeve. The Stainless Steel version is no longer available.. Sensing Bulb Size 5/16" Depth 4" Plumbing Connection Size "A" 1/2" Plumbing Connection Type "A" Male Pipe Thread (mpt)

No longer available in the 48" length. We do have a 36" that may work in your model here: Thermostat, Invensys, 1/4", 36", SPST, 25A Single pole thermostat rated at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is...

Mechanical 24 Hour & 7 Day TimerPanel mount, SPST 20A time mechanism

This is a 4HP Impeller with a 2 1/8" Eye a 1/2" Vane Width and a 4 1/2" OD for an Aqua-Flo 48 or 56 Frame Wet End 4.0HP Motor which would have about 14.0A on high speed. This Impeller fits between the Face and the Volute of an Aqua-Flo XP2 or FMXP2 Wet...

Waterway HiFlo Pump ImpellerClosed face impeller made for the HiFlo side discharge pump by Waterway Plastics. Rated at 2.0hp, it is used in a Waterway HiFlo pump wetend, and must be installed on a 2.0hp (or greater) thru bolt motor. Shaft seal sold...

You are Buying a Black 4" Spa Diverter Handle Knob only. This Diverter Knob mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide sticking through the diverter cap. The Diverter Valve that this part fits is used to...

This part is an Overlay, Hydro-Quip Eco 1, Pump 1, Light, Temp Up, Temp Down, Small Oval This small oval label fits the Eco-1 4-button panel  Manufacturer HydroQuip Model Eco-1 # of Buttons 4 Part Type Overlay