Shop

This part is a Heater Complete with the Sensor set and built in pressure switch an exact generic replacement for the original Watkins No Fault 6000 76227 heater... This is a generic replacement for the various versions of Watkins/Hot Spring/Tiger...

This part is a Heater Complete with the Sensor set and built in pressure switch an exact generic replacement for the original Watkins No Fault 4000 76228 heater...It will only work in countries that use a 60 Hz electric cycle. This is a generic...

This Listing is for a Waterway Executive 56fr 2 Speed 230V 1 HP 2" X 2" Pump.   Your sticker may say 2HP but based on the chart it is really a 1HP at 8 Amps.   This unit features a 2" X 2" Executive Wet End that can be moved from the 12...

Gemini Plus II Pump Complete with Wet End and Air Switch... 1 1/2" X 1 1/2" which measures about 2 3/8" across the threads.. Specifications are 1.5 HP 115Volt 12.5Amps... For high flow bath jet systems Length = 12-11/16" Width = 5-11/16" Discharge...

This Pump is a 48Frame 230V 2 Speed with a 1.0 HP Wet End that features a 2" x 2" inlet and outlet Wet End that measures about 3" across the threads...  High speed Amperage is 7.7 and low speed is 2.2 Amps..   Spa Pump Features: Fine tuned...

This Pump is a 48Frame 230V 2 Speed with a 3.0 HP Wet End that features a 2" x 2" inlet and outlet Wet End that measures about 3" across the threads...  High speed Amperage is 13.1 and low speed is 3.3 Amps.. Note: This pump and motor come without...

This Listing is for a Waterway Executive 56fr 2 Speed 230V 3 HP 2 1/2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock...

The Waterway Executive 48 pump is thermally protected to extend the life expectancy of the motor with a highly versatile wet end.Spa Pump Features: Executive wet end designed specifically for 48-frame motors Large 6-1/2" diameter wet end for higher head...

This Listing is for a Waterway Executive 56fr 2 Speed 230V 2 HP 2" X 2" Pump. Your sticker may say 3HP but based on the chart it is really a 2HP at 10 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to...

This pump s a 115V (2) Speed 13.3 Amp High Speed and 4.1Amp Low Speed 48 frame 2" x 2" XP2 pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage pump and have a tub with a wall...

This Listing is for a Waterway Executive 56fr 2 Speed 230V 3 HP 2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position...

This pump is a Sundance or Jacuzzi Premium 45 Degree 48 frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 10.7 Amps on high speed and 3.2 Amps on low speed and this pump will work as a one or...