Shop

This part is a complete Waterway Pressurized Top Load Filter Housing that has 1 1/2" Slip glue in fittings in both sides that measure about 1 7/8" Inside Diameter... It is designed to mount in a niche so that the main body is under the shell of the...

This is a 115V Center Discharge Aqua-Flo Circulation pump with a 1 1/2" Suction and Pressure side that measures about 2 3/8" Across the threads. Circ-Master pump takes 24-hour filtration to a new level, delivering the highest GPM of any recirculation...

Dimensions 3-1/4Óx7Ó This TSC-8/K-8 control panel will work with most MSPA systems, has 8 buttons including a filtration cycle button, and will control dual pumps and an air blower. It has an LCD display and comes with a 10ft cord. This topside also...

These have been being obsolete but they are back in production and we are expecting some in the May of 2019.. Watkins Replacement Element Old Style for HotSpring come with a gasket kit as well.. Cap with Thermowell and power cord   ...

You are buying a Complete Replacement 5.5KW Heater Assembly that fits a Gecko SSPA or Spa Builders Pack. This Heater Assembly includes the Tub, Element, Pressure Switch, Split nuts and Gaskets. NOTE: If you have the old style SSPA board with the...

This part is a Complete VL-200 or Eco-200 topside that is used on some Balboa 4 button systems..  It features Jet, Temp, Light reading left to right.. It has an 8 pin Cat 5 Phone Style plug and a cord that is 72" long.. Topside...

This part is a Heater Assembly for a HydroQuip CS800 Control Pack.. 4.5kW, 230V, 2" x 15" Long..  CS800 heater, 4.5kW, 2.25”x15”, 304SS, PSI tap, cover plate and studs. Includes 2” ridged gaskets.   Heater Style - Flow-Thru ...

This part is a Balboa, G2, Topside, 5 Button, (1) Pump and Light, LB500S/E8This is an obsolete topside I have one new one left with no cable..

This part is a 5.5kw 15" long Heater Flo Thru Tube found in Waterway Neo Series control packs.. You can replace just the element and not the tube and save some money the kit can be found here: (D) Heater Element 5.5kw Gasket Kit Hot Tub Spa Part M7...

This pump is an Aqua-Flo Tub-Master Energy Efficient Bath Pump 10.0 amps 115 Volts w/Air Switch The Plumbing connections are 1 1/2" on the Pressure and Suction sides which measure about 2 3/8" across the threads.. Note: The Tub-Master line of pumps have...

This Part is a  Complete Jacuzzi Piranha, Theramax or Theraflo 48FR 1.5HP Wet End with 8 mounts. It does not come put together you will have to assemble it.. The kit includes the Volute , Face, Impeller, Seal, Face Gasket and...