Shop

This part is a 4 HP 56 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...

This part is a Complete 1 1/2 HP 48 Frame Vico Wet End that is very unusual with the Heat Blanket Circulation Nipples.. It is 1 1/2" x 1 1/2" meaning it measures about 2 3/8" edge to edge on the threads.. Most wet end that look like this one measures 3"...

Plug End Rainproof GFCI (15amp)14-3 SJTW 15` long cord plug end GFCI GFCI Type    Power CordMounting    Cord MountGFCI Amperage    15AGFCI Style    Single Pole Single Throw...

This filter is found only in Sundance Hot Tubs that is 19" long x 8 1/2" Wide and it has a hole in one end that is 2 1/2" and a nipple on the other end that is 2". This filter can be used in place of the old style filter combination one filter number...

This part is a 5"x 5" Flange Element 5.5kw at 230V or 1.375Kw at 115V with a Gasket, O-Ring and Bolts. This flanged element is found in Plastic Heater housings in Brett Aqualine, Premier  Allstate and Hot Water Products. I have also seen this...

This Part is an 48 Frame 3/4HP TMCP Aqua-Flo Wet End for a Garden Tub Bath Pump that has a voltage of 115V and an Amperage of about 10-11 Amps..  Note: The outside measurement of the threads on this wet end are about 2 3/8" meaning the inside...

This part is a 5.5KW UNIVERSAL Heater Complete Assembly includes Tube, Element, Split nuts and Gaskets. This unit features a 5.5Kw Element, Tube with (2) Split Nuts and gaskets.  This heater will work in place of the following heater: 10554 ,...

This Flow Cone Manifold Kit is exclusively for HotSpring Hot Tubs made by Watkins and can be found under the name Hotspring, Solana, Tiger River, Caldera... This is Kit consists of a Flow Cone Style Manifold, a 2" Heater Union and gasket, 6" of 2" Flex...

You are buying a Complete Replacement 5.5KW Heater Assembly that fits a Gecko MSPA Pack. This Heater Assembly includes the Tub, Element, Pressure Switch, Split nuts and Gaskets.I also offer the element only or the tub and element with no pressure switch...

We are offering a Pre--2002 Master Spa Cartridge Filter 8" x 9 1/4" Wide 2"mpt 70sqft Master Spa Most 1998,1999, 2000. This filter is 8" long x 9 1/4 " Wide and has   2"MPT which measures about 2 1/4" Across . The overall length of this housing...

This Part is a Thermodisc Style Surface Mount HI LIMIT: Single Pole Single Throw THERMAL FUSE Auto Reset (With NO CAPILLARY)This Hi Limit Surface mount surface mounts to the heater in a spot where it can read what the actual water temperature is flowing...

This part is a Complete XP2e 6.3” 1.5HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 56 frame wet end for XP2e pumps. This wet end is used with a 56 frame motor that would have about 9.0 Amps on High Speed on a 230V...