Shop

This is a 230V Waterway Tiny Might Circulation Pump that is 1" x 1" which measures about 1 7/8" to the outside of the threads. It is high in efficiency and low on power use. Tiny Might packs a not-so-tiny punch. The Tiny Might offers you a great low flow...

This part is the Cord Side Male AMP Connector that houses (2) Male Pins.. The Pins are not included.. This connector is used often on light cables.. Terminal Type AMP Terminal Style AMP Plug Housing Male Number of Connections 2 Terminal Amperage...

This part is a Old Style Glue in Manifold, 3/4" Slip, 8 Port, Flow Thru, 1-1/2" Slip x 1-1/2" Spigot/Street.. Barb/Port Size    3/4"Number of Ports    8Manifold Fitting Type    Flow-ThruManifold Plumbing Size...

This filter cartridge is 9" Tall x 6' Wide and features a 1 1/2" MPT screw in nipple which measures about 1 13/16" to the outside of the threads. This filter is found in LA and Advanced spas and more.     Diameter 6" Length 9" Top Style...

"Magicmend" Pipe extenderSimply cut the bad fitting and remove it from the system. Glue the correct size Magicmend into place and replumb your new fitting

Sundance Temperature Sensor MountFor Sundance 601-605, 624, or other 3/8" bulbs

This part is a Wear Ring for a Hi-Flo Impeller found in Waterway Hi-Flo pumps only.. The Inside Diameter of the wear ring is 1 13/16"...

This filter fits some Vita Spas manufactured by DM Industries..It features a 2" MPT thread which measures about 2 3/8" across the threads and is 8 1/2" wide x 7" Tall... Diameter 8-1/2" Length 7" Top Style Handle Bottom Style Male Pipe Thread...

MDA Series Slo Blo FuseCeramic construction for protection of loads to 30 amps

You are Buying a Black Smooth 3 5/8" Spa Diverter Cap only. This is a NON  Buttress Cap if your cap has the word Buttress stamped in it look in our store for a Buttress cap. This Diverter Cap mounts on top of the Diverter Valve with...

Balboa Water GroupStainless steel replacement complete heater assembly, 5.5kW, 230v or 115V.Thie heater measures 2" Inside Diameter of the tube and the length of the tube is 15". Includes M7 sensors, tailpieces, split-nuts and gaskets. Made for Balboa VS...

This parts is an Executive 2" Threaded Face plate assembly (Which will measure about 3" Across the Threads) less the O-rings, Screws, Bleeder Plugs and other hardware needed to attach it to the volute..There is another version of the face with a 2 1/2"...