Complete Heaters

This part is a complete New Old Stock Heater that was used on some Icon or Jumpking Hot Tub and Others.. Stainless steel, 1-1/2" x 8-1/2", 1.0kW/115v replacement heater with ground lug, (2) 1-32 x 3/8" mounting studs, and split nuts. The element is...

Balboa Water GroupStainless steel replacement heater assembly, 4.0kW, 230v or 115v, the inside Diamater of the tube is 2" and the overall length of the tube is 15" not including the split nuts on each end. This comeplete heater includes M7 sensors,...

Balboa Water GroupStainless steel replacement complete heater assembly, 5.5kW, 230v or 115V.Thie heater measures 2" Inside Diameter of the tube and the length of the tube is 15". Includes M7 sensors, tailpieces, split-nuts and gaskets. Made for Balboa VS...

This part is a Stainless steel aftermarket replacement heater assembly that fits systems using a pressure switch positioned 90 degrees from the heater terminals. 5.5kW/230v with 1/8"npt pressure switch tap. 2" x 15" manifold includes 2"mbt nuts and 2"s...

This part is a 5.5KW UNIVERSAL Heater Complete Assembly includes Tube, Element, Split nuts and Gaskets. This unit features a 5.5Kw Element, Tube with (2) Split Nuts and gaskets.  This heater will work in place of the following heater: 10554 ,...

You are buying a Complete Replacement 5.5KW Heater Assembly that fits a Gecko MSPA Pack. This Heater Assembly includes the Tub, Element, Pressure Switch, Split nuts and Gaskets.I also offer the element only or the tub and element with no pressure switch...

This Part is a Thermodisc Style Surface Mount HI LIMIT: Single Pole Single Throw THERMAL FUSE Auto Reset (With NO CAPILLARY)This Hi Limit Surface mount surface mounts to the heater in a spot where it can read what the actual water temperature is flowing...

You are buying a 5.5KW Heater Complete Assembly includes Tube, Element, M7 Sensors, Split nuts and Gaskets. This unit features a 5,5Kw Element, Tube with (2) M7 Sensors on either end with (2) Split Nuts and gaskets. I also offer this heater and tube...

You are buying a Complete Replacement 4.0KW Heater Assembly that fits a Gecko SSPA or Spa Builders Pack. This Heater Assembly includes the Tub, Element, Pressure Switch, Split nuts and Gaskets. NOTE: If you have the old style SSPA board with the...

You are buying a Complete Replacement 5.5KW Heater Assembly that fits a Gecko SSPA or Spa Builders Pack. This Heater Assembly includes the Tub, Element, Pressure Switch, Split nuts and Gaskets. NOTE: If you have the old style SSPA board with the...

Cal Spas 1990-1992No pressure switch tap. Stainless steel replacement heater assembly 1-1/2" x 15-3/4" manifold includes 5.5kW/240v element and split nuts with tailpiecesNote: Element replacement is not recommended for this manifold

Balboa Water GroupStainless steel replacement complete heater assembly, 5.5kW/1.375kW ,230v or 115v, this tube measures  2" Inside Diameter and the overall tube length is 15" not counting the split nuts. This heater includes M7 sensors, tailpieces,...