PVC Plumbing Fittings

Inside Pipe Repair Glues Inside 2" Pipe on both ends. Magic Mend Simply cut the bad fitting off of 2" hard pipe and remove it from the system. Glue the 2" size Magicmend in between two peices of 2" ID pipe to mend pipe back together

You are buying a (1) 45¡ 1 1/2" Street X 1 Slip PVC Plumbing Fitting. The Union glues into a 1 1/2" fitting on one side and then receives the fitting on the other side. It will Glue into any 1 1/2" PVC fitting to make a tight plumbing application...

This item is a 3/4" Slip x 3/4" Slip pvc coupler the inside diameter of the coupler is 1", This is a chart for the outside of your plumbing pipes so you can figure out what size parts to order. Note: The actual size a part is called is not the actual...

This is a plug used to plug off a 3/8" port on Air manifolds or Air Sides of Jet Bodies that are above the water line of the tub. We offer many different plugs based on the brand of manifold.

This part is a Bushing Reducer 2" Street x 1 1/2" Slip converts a 2" glue in fitting into a 1 1/2" Glue In Fitting. For example you can install a 2" manifold in place of 1 1 1/2" Manifold by gluing this on the 1 1/2" pipe and gluing it inside of a slip...

This part is a Barb Adapter 3/4" Barb x 1" Street or 3/4" Inside Slip.

Inside Pipe Repair Glues Inside 1 1/2" Pipe & into 1 1/2"spg Fittings Magic Mend Simply cut the bad fitting off of 1 1/2" hard pipe and remove it from the system. Glue the 1 1/2" size Magicmend into the pipe and replumb your new fitting

This part is a Barb Adapter 3/4" Barb x 3/4" Street or 1/2" Inside Slip.. The means a 3/4" Inside Diameter tube would glue over the barb side while a 1/2" pipe which is 3/4" Outside Diameter would glue inside or a 3/4" Slip fitting that measures 1"...

Inside Pipe Repair Glues Inside 2" Pipe & into 2"spg Fittings Magic Mend Simply cut the bad fitting off of 2" hard pipe and remove it from the system. Glue the 2" size Magicmend into the pipe and replumb your new fitting

This item is a 1/2" Slip x 1/2" Slip pvc coupler the inside diameter of the coupler is 3/4", This is a chart for the outside of your plumbing pipes so you can figure out what size parts to order. Note: The actual size a part is called is not the actual...

This part is a 1 1/2" Slip X 1 1/2" Pump Union with Gasket or Oring that matches Union. The Union receives a 1 1/2" pipe or fitting on one side and then Screws to a 1 1/2" Wet end(Pump) Threaded Part on the...

This part is a (1) 2" Slip X 2"Slip Coupler PVC Plumbing Fitting. The Coupler receives a 2" fitting which measures 2 3/8" OD on one side and then receives a 2" fitting which measures 2 3/8" OD on the other side. The inside diameter of...