Shop

This part is a Dimension One, New Style, Telescoping Skimmer Weir, Assembly, 8 Inch, Graphite Gray.. Note: The Gray and White versions have been discontinued..

You are buying an Air Bleeder Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug. This style set up is is usually found in Dimension One Hot Tubs in the Filter area and other brands as well.. Note; The plug is not sold...

You are buying an Oval 2 Pump & Aux Overlay that fits an Oval Balboa E8 with a Cat 5 Type plug end that uses only 6 or 7 of the buttons.  Note: These topsides do fail and usually the buttons to the left of the screen are what fails on...

You are buying an Oval 2 Pump & Blower Overlay that fits an Oval Balboa E8 with a Cat 5 Type plug end that uses only 6 or 7 of the buttons.  Note: These topsides do fail and usually the buttons to the left of the screen are what fails on...

You are buying an Oval 3 Pump Overlay that fits an Oval Balboa E8 with a Cat 5 Type plug end that uses only 6 or 7 of the buttons.  Note: These topsides do fail and usually the buttons to the left of the screen are what fails on either style of...

This parts is a Replacement Pump Side J&J Plug on some 2 Speed Pumps.. Look at the configuration and be sure yours matches as there are several different configurations... This one is a Triangle shape on the Red, Black and White wires.. Male End...

This parts is a Replacement Control Side J&J Plug on some 2 Speed Pumps.. Look at the configuration and be sure yours matches as there are several different configurations... This one is a Triangle shape on the Red, Black and White wires.. This item...

This part is a Clip that hold the  Jacuzzi Spa Trap, Mesh Skimmer Bag into place inside the filter housing. Fits most J-300 Series, 2002 and newer and here is a link to the filter for this tub too Jacuzzi Premium 2002+ Filter Skimmer Bag has 6 holes...

This item is a Gray Complete Suction Fitting that requires a 3 3/8" hole... The cover is 5 3/16" Wide... The plumbing size is 2" which would measure about 2 3/8" Outside Diameter of the pipe that glues in.. If your plumbing is 1 1/2" you would need a 2"...

This Filter is a 40 Square Foot Filter Cartridge for a Dynasty Hot Tub that is 6" Outside Diameter x 8 1/4" in Length. It has a 1 1/2" SAE Threaded Fitting which is a Thick Thread that measures about 2" outside diameter of the threads. SAE Threads are...

This is a 4HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 1/2" Vane width and 4 1/2" OD for an Aqua-Flo 48 or 56 Frame Wet End 4.0HP Motor would be about 14.0 Amps on high speed at 230V. This Impeller fits between the...

This is a 4HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 1/2" Vane width and 4 1/2" OD for an Aqua-Flo 48 or 56 Frame Wet End 4.0HP Motor would be about 14.0 Amps on high speed at 230V. This Impeller fits between the...