Shop

This filter is made specifically for Dream Maker Hot Tubs only and it is a 27 Square Foot Oval Shaped Filter Cartridge that is 6-1/4" Outside Diameter on the Widest Part of the Oval x 9-3/4" in Length. It has an Oval Hole in the top that measures about 4...

This part is an Add On Air Bleeder kit featuring a Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug, (2) Clamps for each end of the tubing and 36" of Clear 3/8" ID and Silicon sealer..   This kit can be added if you...

You are Buying a 4 1/8" Wide Diverter Cap & Handle for a 2008+ Hot Spring, Caldera, Tiger River, Watkins Diverter Valve. This Kit comes with The Cap & Handle only. The Valve these parts fit can be found on Hot Spring, Caldera, Tiger River...

You are Buying a Long Stem Style Repair kit for a 4 1/8" Wide Spa Hot Spring Caldera Tiger River Watkins Diverter Valve. This Kit comes with The Cap, Handle, Stem and (2) Small O-Rings and (1) Large O-Ring. The Valve these parts fit can be found on Hot...

This part is a Spa Waterfall or Neck Jet 1" Control (3) Or-ring Set which includes (1) Large & (2) Small O-Rings only. This 1" Diverter Control O-Ring Kit features (3) Oring/Gasket and is about 1 7/16" I.D. and the groove it fits into is about 1...

This Parts is a NON-Standard 2" Heater or Pump Union Gasket with a 2 5/8" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2" and the lip that fits into the union is 2 5/8" center to...

This part is a 1-1/2" Slip (2"Spigot) on each end Clear Check Valve found on Watkins Hot Tubs HotSpring 1989 To Present and All Tiger River Models..   

You are purchasing (1) 30 Amp SC-30 Buss or Cooper Bussman Fuse that is 1 5/8" Long X 3/8" wide found on many Balboa , Gecko, Hydroquip , ACC, Nuwave , Len Gordon , Spa Builders and more Brand Spa Hot Tub Boards and control packs. This Fuse can also...

This is a 2HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 1/4" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 2.0HP Motor would be about 10.0 Amps on high speed at 230V or 16.0 Amps High Speed at 115V...

This is a 2HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 1/4" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 2.0HP Motor would be about 10.0 Amps on high speed at 230V or 16.0 Amps High Speed at 115V...

This is a Watkins Wavemaster 8000 or 8200 2.0HP Seal Kit & Impeller with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081. Impeller Type ...

This 1.5 Horse Power Impeller, (2) Bearings & Seal Kit fits a 48 Frame Pump Wet Ends manufactured by Guangdong LX Brand only. The pumps this Impeller, Bearing & Seal Kit fits usually have the part number WUA-150, WP-150 or LP-150 on the label...