Shop

This Filter is a 40 Square Foot Filter Cartridge for a Dynasty Hot Tub that is 6" Outside Diameter x 8 1/4" in Length. It has a 1 1/2" SAE Threaded Fitting which is a Thick Thread that measures about 2" outside diameter of the threads. SAE Threads are...

This is a 4HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 1/2" Vane width and 4 1/2" OD for an Aqua-Flo 48 or 56 Frame Wet End 4.0HP Motor would be about 14.0 Amps on high speed at 230V. This Impeller fits between the...

This is a 4HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 1/2" Vane width and 4 1/2" OD for an Aqua-Flo 48 or 56 Frame Wet End 4.0HP Motor would be about 14.0 Amps on high speed at 230V. This Impeller fits between the...

You are buying a Kit that features (1) PS-200 Seal and (2) Bearings that fit most motors that are mated to Aqua-Flo Pump Wet Ends as well as Waterway " Viper" Wet Ends, The Professor silly Juice to seal the seal. This Seal is used in Most Aqua-Flo...

This part is a Complete CMP Bottom Drain Suction that is VGB Comaptible and requires a 3 5/16" Hole..  Suction Fitting Complete    Complete Assembly, StraightHole Size    3-5/16"Cover Diameter  ...

NOTE: This part is obsolete but we do have an alternative camp that will work but it is Dark Graphite Gray. If you order this Teardrop cap you will get the 6 spoke cap instead.. This part is a Cal Spa 1" Spa Hot Tub Air...

This part is a Complete 1 3/4" Face, Jet Assembly, Waterway, Ozone, Swirl Face, 1 1/4" Hole Size, 3/4" Barb, Gray.. 

This part is a Complete 1 3/4" Face, Jet Assembly, Waterway, Ozone, Swirl Face, 1 1/4" Hole Size, 3/4" Barb, Dark Gray.. 

This part is a Complete Jet Assembly, CMP, Ozone, Smooth Face,3" Face, 2" Hole Size, 3/4" Barb, Gray in color.. 

This part is an Impeller for a 48fr Vico Ultima or Ultra Flo, 0.50hp, Jet or Circulation Pump... Closed face impeller made for the Ultima and Ultra Flo spa pumps by Vico/Balboa. Rated at 1/2hp, it is used in an Ultima and/or Ultra Flo pump wet end, and...

This Waterfall or Neck Jet Control Stem is Used in Waterway Top Access 100% shut-off valves 1". This valve has a piece of rubber on the backside to complete the seal..  Click on the links below for related part:  Spa Hot Tub 1" Waterfall or...

You are Buying a 1" Ball Gasket that fits inside of a Waterway air control valve over top of the ball..  NOTE: This listing is for the Gasket only all other items shown are for illustration only and are not included.