HTPOFAmerica

Watkins Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 1019801-03 3536 Wavemaster 8200

(No reviews yet) Write a Review
SKU:
HTP56WUAAEE-IIWatkins
  • Watkins Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 1019801-03 Vendor Code 3536 Wavemaster 8200
  • Watkins Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 1019801-03 Vendor Code 3536
  • Watkins Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 1019801-03 Vendor Code 3536
2" Suction Side measures 3" across the threads..
  • Watkins Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 1019801-03 Vendor Code 3536
2" Pressure Side measures 3" across the threads..
  • Watkins Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 1019801-03 Vendor Code 3536
  • Watkins Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 1019801-03 Vendor Code 3536
  • This wiring diagram is for 1 or 2 speed pumps..
When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • This wiring diagram is for 1 or 2 speed pumps..
When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • Watkins Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 1019801-03 Vendor Code 3536
  • Watkins Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 1019801-03 Vendor Code 3536
  • Watkins Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 1019801-03 Vendor Code 3536
  • Watkins Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 1019801-03 Vendor Code 3536
  • Watkins Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 1019801-03 Vendor Code 3536
  • Compare your screws to be sure that this is the correct wet end.
MSRP: $419.99
$399.99
— You save $20.00

Description

This 2.0HP Horse Power 10.0/3.5 Amp (2) Speed 56 Frame Complete Pump is a Watkins Vendor Code 3536 Intertek LX Brand Pump. These pumps usually have the part number 1019801-03 and Wavemaster 8200 on the label. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 15" from the back to front edge. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread. 

For the Bleeder Barb That fits this pump click Either of these links one is a 1/4" and one is a 1/2":

Barbed Bleeder Plug WUA Intertek LX 48 or 56 Frame Wet End Fine Threads

Pump Bleeder Barb, Watkins, Wavemaster, LX, 1/2" Barb x 1/4"Mpt

 

NOTE: This Pump looks a lot like an Aqua-Flo and a CMP Pump and they will interchange if you replace the entire pump! 

 
View AllClose