Shop

  NOTE: This Seal will NOT Fit Sundance® or Jacuzzi® Tubs with a Guangding LX Wet End for those parts click here Jacuzzi® & Sundance® LX Parts    This Seal Set is used ONLY in Guangdong...

This filter Fits Some AquaTerra & Freeflow Spas, it is a 40 Square Foot Filter Cartridge that is 5-3/8" Outside Diameter x 9-1/2" in Length and features a 1 1/2" MTP Fine Threaded Male Fitting which measures about 1-3/4" Edge to Edge....

This part is a CMP brand Pressurized Filter Cap Bleeder Plug with a Wing Nut handle and O-Ring..

This part is a 9" Fat Graphite Single Pin pillow with the number 25702-247 in the back of it.. This pillow fits Hydro Spa, Premium Leisure and Platinum Legend and Others. It is 9" long and  It is Graphite in color.  

This part is a Balboa E4 4 Button Overlay for a 6-3/8" x 2-1/4" Rectangle Topside.        The button configuration of Blower, Jet, Temp and Light left to right. This Overlay can be used to replace your original...

This is a 3.0HP Seal and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 7/16" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V.. This Impeller fits between the Face and...

This is a 2.5HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 3/8" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V.. This Impeller fits between the...

This is a 2.5HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 3/8" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V.. This Impeller fits between the...

This item is a Black Handle used on a Waterway Waterfall or Neck Jet control only.. Note: this looks similar to an Air Control Handle but they are different.. The main thing is the Square part that slides on the valves stem it is about...

This is a 3HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 7/16" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V.. This Impeller fits between the...

This is a 3HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 7/16" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V.. This Impeller fits between the...

This is a Watkins Wavemaster 9000 or 9200 2.5HP Seal Kit & Impeller with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081. ...