Pump Wet Ends and Related Parts

This Face Plate O-Ring Is 5 1/8" Inside Diameter and is 1/8" Thick. It is found on Aqua-Flo 1 1/2" x 1 1/2" (Which Measures 2 3/8" Outside of the threads on the Sunction and Pressure Side of the Wet End) These Wet Ends used the names Flo-Master,...

This Kit is a 3/8" Tubing Connection Kit for 3/8" Plumbing repairs where you are connecting old 3/8" Clear Tubing that measures about 1/2" OD between a cut air control line and the 3/8" Barb on an Air Manifold or Jet Body Air connection.. The kit...

NOTE: This Seal will NOT Fit Sundance® or Jacuzzi® Tubs with a LX Guangdong Wet End for those parts click here Jacuzzi® & Sundance® LX Parts This Swim Spa Pump part is a Swim 56 Seal Kit that includes the...

This 5.0 Horse Power Swim 56 Impeller fits 56 Frame Pump Wet Ends manufactured by Guangdong LX Brand only that have the WUA500 marking only. The pump this impeller fits usually have the part number Swim 56 on the label. This impeller will not fit the...

  NOTE: This Seal will NOT Fit Sundance® or Jacuzzi® Tubs with a Guangding LX Wet End for those parts click here Jacuzzi® & Sundance® LX Parts    This Seal Set is used ONLY in Guangdong...

This is a 3.0HP Seal and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 7/16" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V.. This Impeller fits between the Face and...

This is a 2.5HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 3/8" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V.. This Impeller fits between the...

This is a 2.5HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 3/8" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V.. This Impeller fits between the...

This is a 3HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 7/16" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V.. This Impeller fits between the...

This is a 3HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 7/16" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V.. This Impeller fits between the...

This is a Watkins Wavemaster 9000 or 9200 2.5HP Seal Kit & Impeller with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081. ...

This part is a Kit that features (1) Seal, (2) Bearings, Seal Tool and Silicon that fit (4) Mount Style Piranha, Thera-Flo, Thera-Max pumps and The Professor's Silly Juice to seal the seal. It is 1 3/8" Across the back of the Spring Seal part that goes...