Shop

This part is a Set of (2) 2" Pump Union Split Nut Repair Kit which includes the split nut and (2) Screws for use with a 2" Pump Union. The Pump Union Split Nut that measures about 3" on the Inside of the Threaded Part and mounts to the existing Pump...

This Kit is a Set of (2) 2" Spigot X 2" Slip Slice Gate Valve Kit with a Jacuzzi® J Style Pump Unions with O-rings, (2) 2" Street x Slip Slice Gate Valve and (2) 2" Couplers for glueing 2" plumbing to the slice valve...

This Kit is a 2" Spigot X 2" Slip Slice Gate Valve Kit with a Jacuzzi® J Style Pump Union with O-ring and a 2" Coupler for gluing 2" plumbing to the slice valve.  The Valve receives a 2" pipe or fitting on one side and...

This Kit is a Set of (2) Jacuzzi® J Pump Style Pump Union that can be used on 1 1/2" or 2" Plumbing systems. This union can receive a 1 1/2" plumbing part inside the back of the union or a 2" Plumbing part glued to the...

This part is a Diverter in a Kit which Includes 4oz of Red Hot Blue Glue and 4oz of Purple Primer and the Diverter Valve, (3) 2" Couplers, (3) 6" Pieces of 2" Flex Pipe and (2) 2" Street Slip Ells. This Kit can be used to cut out an...

This part is a Diverter in a Kit which Includes the Diverter Valve, (3) 2" Couplers, (3) 6" Pieces of 2" Flex Pipe and (2) 2" Street Slip Ells. This Kit can be used to cut out an old Diverter and install this new Diverter in it's...

This part is a 3 3/4" Wide 2"slip x 2"slip x 2"slip Spa Diverter Complete Assembly Gray Valve.  The 2" Slip fittings receives a 2" pipe or fitting that would measures about 2 3/8" OD.. We also offer This Diverter in a Kit...

You are purchasing a Mazzei Brand Cap that fits a Model 584K or 684K Ozone Injector that is used inline to create suction to pull Ozone Gas from an Ozonator into the Hot Tub water. This Black or Red Injector Cap can be used in place of the Red or...

You are purchasing a Black Mazzei Brand Model 584K Ozone Injector Assembly Complete that is used inline to create suction to pull Ozone Gas from an Ozonator into the Hot Tub water. This Injector can be used in place of the Red Injector 684K. This...

You are buying a Waterway Brand Flapper Tee Air Check Valve with a  1" Slip X 1" Slip Fittings on each end. This valve is used to allow air flow in one direct and to stop water flow in the other direction when plumbed properly in a Hot Tub. The...

This kit is a 2" Slip X Dead End X (4) 3/4" Barbs X (1) 3/4" Barb manifold repair kit for freeze damaged Cal Spa or Coleman Spas with 4oz of Christy's Red Hot Blue Glue. These manifolds are found on the left front side of the tub usually...

This kit is a 2" Slip X Dead End X (4) 3/4" Barbs X (1) 3/4" Barb manifold repair kit for freeze damaged Cal Spa or Coleman Spas. The manifolds are found on the left front side of the tub usually and has 4 lines and the drain attached to...