Circuit Boards

This part is a complete New Old Stock Heater that was used on some Icon or Jumpking Hot Tub and Others.. Stainless steel, 1-1/2" x 8-1/2", 1.0kW/115v replacement heater with ground lug, (2) 1-32 x 3/8" mounting studs, and split nuts. The element is...

In this video The Spa Guy tells you the basics about diagnosing and replacing a M7 sensor on a Balboa Board.  Click this link for the m7 sensors on this site: M7 Sensor #sparepair #hottubrepair #spaguy #thespaguy Save Save Save Save Save Save Save...

In this video The Spa Guy tells you the basics about Relays for repairing Balboa Boards. We also offer in-house board repair as well as Videos of how to repair the board. #sparepair #hottubrepair #spaguy #thespaguy Save Save Save Save Save Save Save...

In this Video The Spa Guy Repairs a Aqua-Flo XP2e pump that was leaking.. He replaces the seal and impeller and cleans the shaft up.. The bearing was not bad so no need to replace that.. Save Save Save Save Save Save Save Save Save Save Save Save Save...

This video is about The Spa Guy showing How To Diagnose a Master Spa with a Balboa MAS560 Board that has full power to the board but still does not operate.. it is a similar process on all brands... Save Save Save Save Save Save Save Save Save Save Save...

This part is a VS501Z Board that operates (2) Jet pumps or (1) Pump and Blower, Light and a Circulation Pump if equipped.. This board is used with (4) Button Topsides.. Circuit Board Application    Balboa Water GroupCircuit Board...

This part is a Jumper Strap Set of (2) Kit to connect the heater to the circuit board on Balboa LE and Value Systems. Measures 1-3/8" x 13/16" Circuit Board Application    Balboa Water GroupCircuit Board Model    LE, Value...

You are purchasing a Balboa Board Fuse Repair Jumper for board soldered on fuses found on many Balboa Brand Spa Hot Tub Boards. This jumper features a fuse holder with a .5A replaceable Fuse that can be added to any soldered on board fuse that has been...

T90 Style Circuit Board RelayCircuit board mounted, available in various coil voltages. Use to complete simple circuit board repairActionCoilAmpsSPST24 VDC30amp

This Part is a Single Jumper Strap for a Balboa, EL, VS, GL or GS, Heater to Board connection.. This part is made from Copper.. Measures 2" x 13/16" Circuit Board Application    Balboa Water GroupCircuit Board Model    EL,...

This part is a Standard Balboa Heater M7 Sensor with a 24" wire. This Sensor comes with the wire, Connector, and The Screw down cap. It DOES NOT include the tube and the tube side mount. You will normally not need the sensor mount you would reuse it so...

This part is for a Standard Balboa Board Replacement Repair Relay made by Zettler. This Relay is the standard relay found on most Balboa Boards but it has double tabs on it so you can add jumpers from the tabs to the feed and load side of the circuit to...