(B) Flow Thru Element, 5.5kW, M7 , 10-1/2", 115/230v, Teflon Coated ( Better)

You are buying a 5.5KW DuPont Teflon® Coated Flow Thru Heater Element for 230V or 115V Applications that features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko, ACC, and most other standard 15" Long Hot Tub Heater Tubes. The list on this Element is $84.99.  This part used in newer hot tubs and features .

Note: We do offer a (Good) Standard Version that is Incoloy and a (Best) Version that is Titanium that is more resistant to Chemicals as well as salt..

Flow Thru Element, 5.5kW, Generic, 10-1/2", 115/230v, Teflon Coated

Heater Element 5.5kw Kit Hot Tub Spa Part M7 Balboa Gecko Hydroquip Titanium Kit

Note: When testing this heater if it trips the breaker simply unplug it and if the breaker stays on plug back in and if it trips this heater is the cause if it is not a breaker trip issue then measure between the two terminals with an Ohm meter it should measure about 10.5K ohms. If it measures 0K it is open. If it is not tripping the breaker and doesn't measure open then the heater is not bad look for other issues that cause no heat Like a Pressure Switch, Stopped up filter, No water movement, Open circuit on board etc…..  On this particular heater the pressure switch is included and it can cause a no heat condition and can be purchased separately.

The high technology performance of DuPont Teflon® industrial coatings makes them the natural choice in many industries. They use Teflon® industrial coatings to ensure the ideal combination of properties for chemical resistance, corrosion resistance and abrasion resistance..

25-4034-BI

We have done a lot of extra work with videos and pictures to prevent you from choosing the wrong part..