HTPOFAmerica

Complete Pump, Aqua-Flo, XP2, 2.0HP, 230v, 2-spd, 48 frame, 2", 1 or 2 speed 8.5A

(No reviews yet) Write a Review
SKU:
HTP34-402-KLEC/06120500-LECE
  • Complete Pump, Aqua-Flo, XP2, 2.0HP, 230v, 2-spd, 48 frame, 2", 1 or 2 speed 8.5A
  • The wet end on this pump can be turned to different positions. You simply loosen the through bolts on the back of the motor and pull the bolts out and turn the wet end the way you want it turned and put the through bolts back in..
Complete Pump, Aqua-Flo, XP2, 2.0HP, 230v, 2-spd, 48 frame, 2", 1 or 2 speed 8.5A
  • The Pressure Side measures about 3" Edge to Edge..
  • The Suction Side measures about 3" Edge to Edge..
  • The wet end on this pump can be turned to different positions. You simply loosen the through bolts on the back of the motor and pull the bolts out and turn the wet end the way you want it turned and put the through bolts back in..
  • The wet end on this pump can be turned to different positions. You simply loosen the through bolts on the back of the motor and pull the bolts out and turn the wet end the way you want it turned and put the through bolts back in..
  • Complete Pump, Aqua-Flo, XP2, 2.0HP, 230v, 2-spd, 48 frame, 2", 1 or 2 speed 8.5A
  • Complete Pump, Aqua-Flo, XP2, 2.0HP, 230v, 2-spd, 48 frame, 2", 1 or 2 speed 8.5A
  • Complete Pump, Aqua-Flo, XP2, 2.0HP, 230v, 2-spd, 48 frame, 2", 1 or 2 speed 8.5A
  • Complete Pump, Aqua-Flo, XP2, 2.0HP, 230v, 2-spd, 48 frame, 2", 1 or 2 speed 8.5A
  • Complete Pump, Aqua-Flo, XP2, 2.0HP, 230v, 2-spd, 48 frame, 2", 1 or 2 speed 8.5A
  • Complete Pump, Aqua-Flo, XP2, 2.0HP, 230v, 2-spd, 48 frame, 2", 1 or 2 speed 8.5A
MSRP: $641.99
$524.99
— You save $117.00

Description

This pump is an Aqua-Flo XP2 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 8.5 Amps on high speed and 2.8 Amps on low speed and this pump will work as a one or speed pump..
Manufacturer    AquaFlo
Pump Model    XP2
Speed    2 Speed (2-Spd)
Motor Voltage    230v
Drain Plug Location    4,6,9 o`clock
Suction Style    Center
Suction Connection Type    Male Buttress Thread (mbt)
Suction Pipe Size    2"
Discharge Style    Side
Discharge Connection Type    Male Buttress Thread (mbt)
Discharge Pipe Size    2"
Horsepower    2.0hp
Motor Frame    48 Frame Thru-Bolt
Motor Amperage/Wattage    8.5A/2.8A

 

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 

For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example.

8.0 = 1 HP

10.0 = 2 HP

12.0 = 3 HP

14.0 = 4 HP

16.0 = 5 HP

 

For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP.

  8.0 = .5 HP

9.0-10.0 = .75 HP

10.0-13.00 = 1 HP

13.5-15.0 = 1.5 HP

16.0-20.0 = 2 HP

Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor.

 

NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label.

NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.

View AllClose