Barbs & Related Parts

This part is a Trough Filler Water Nozzle Wall Fitting featuring a 3/8" Barb that is used in a Waters Edge Hot Tub to fill the waterfall spill over..  Note: This Part is Graphite Gray. Other Brands might be Dr Wellness    

This Kit consists of 4" of 3/4" Inside Diameter Clear Tubing, (2) Clamps and (2) 1" Street x 3/4" Barb Couplers.. This Kit is used to connect your 3/4" pipe connection that is being replaced to a more modern outside barb type seal... You achieve the 3/4"...

This Kit is a Barb Coupler, Glue, Tubing and Clamps..   3/4" smooth Barb x 3/4" Smooth Barb with 6" of 3/4"ID Tubing and (2) 3/4" Roto Clamps used to extend a 3/4" tube to Barb connection..

This Kit is a Barb Coupler, Tubing and Clamps..  , 3/4" Smooth Barb x 3/4" Smooth Barb with 6" of 3/4"ID Tubing and (2) 3/4" Roto Clamps used to extend a 3/4" tube to Barb connection..

This Connect Kit is an Air Bleeder barbed plug, 3/8" X 3/8" Barbed Coupler, 4" of 3/8" Tubing and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many...

This part is a 3/4" Barb x 3/4" x 3/4" Barbed Tee used to couple 3/4" ID Tubing together. Other Parts Normally used with this part: Tubing 3/4" Inside Diameter 1" OD (1) Foot Used on Water Manifolds and More (2) Feet of Tubing 3/4" Inside Diameter...

This part is a 3/4" Barb x 3/8" x 3/4" Barbed Tee used to couple 3/4" ID and 3/8" ID Tubing together. Other Parts Normally used with this part: Tubing 3/4" Inside Diameter 1" OD (1) Foot Used on Water Manifolds and More (2) Feet of Tubing 3/4"...

This Kit is a Barb Adapter, 3/4" Barb x 2" Spigot... that will glue inside of a 2" Slip Manifold or other 2" Slip fitting and is usually used to couple a 3/4" water tube back to the barb on the fitting.. Also Note: If you order a manifold kit that...

This Kit is a Barb Adapter, 3/4" Barb x 2" Spigot to 3/4" X 3/4" Barb Coupler Kit, Fits 2" Slip Water Manifolds that features (2) Clamps, 4" 3/4" ID Tubing and (1) 3/4" x 3/4" Barb coupler..  that will glue inside of a 2" Slip Manifold or other...

This Kit is a Universal Air Bleeder Connect Kit with (1) 1/4" Mpt X 3/8" Barb Plug, (1) 3/8" x 3/8" Barb Coupler, (4") of 3/8" Clear Tubing and Silicon sealer usually used on Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I...

This kit is an Air Bleeder Barbed Plug Connect Kit that features a Barbed Plug that is 1/4" MPT x 3/8" Barb, (1) 3/8" x 3/8" Barbed Coupler, 4" of 3/8" clear tubing and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air...

This kit is a Set of (2) Air Bleeder barbed plugs,(2) 3/8" x 3/8" Barb couplers, (2) 4" long pieces of 3/8" Tubing and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up...