1 1/2" Wet Ends Type "E" Spaflo Iron Might
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Union Adapter, 2" Threaded Outside x 1-1/2" Threaded Inside, w/O-Ring
Aquaflo/Gecko
MSRP: $17.63$13.99Standard Pump Union Adapter Assembly With this adapter you can convert a 2" Threaded Pump Union whcih measures about 3" I.D. to a 1 1/2" threaded fitting which = 1 7/8" O.D. standard wet end. An O-Ring does come with this fitting but if you just needed...MSRP: $17.63$13.99 -
Barb Adapter, 3/8"b x 1/4"mpt Pump Wet End Face fits Waterway
HTPOFAmerica
MSRP: $9.99$6.99This part is a Bleeder Barb that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts & Wetends, Power-Right 9089X, 9094X,...MSRP: $9.99$6.99 -
Set of (2) Hot Tub Spa 1 1/2" Slip X 1 1/2" Pump Union with Gasket
HTPOFAmerica
MSRP: $21.99$18.49You are buying a Set of (2) 1 1/2" Slip X 1 1/2" Pump Unions with Gasket or Oring that matches Unions. The Union recieves a 1 1/2" pipe or fitting on one side and then Screws to a 1 1/2" Wetend(Pump) Threaded Part on the other side. It will Glue to a 1...MSRP: $21.99$18.49 -
Hot Tub Spa 1 1/2" Slip X 1 1/2" Pump Union with Gasket Video How To
HTPOFAmerica
MSRP: $12.99$9.99This part is a 1 1/2" Slip X 1 1/2" Pump Union with Gasket or Oring that matches Union. The Union receives a 1 1/2" pipe or fitting on one side and then Screws to a 1 1/2" Wet end(Pump) Threaded Part on the...MSRP: $12.99$9.99 -
1 1/2", Gasket, Heater or Pump, Union, with 1 7/8" Groove How to Video, 1-1/2"
HTPOFAmerica
MSRP: $7.99$4.99NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This part is a Standard 1 1/2" Heater or Pump Union Gasket. The gasket is 2 3/8" across and fits unions that have a 1...MSRP: $7.99$4.99 -
Spa Hot Tub Pump Air Bleeder Add On Kit 1/4" Mpt X 3/8" Barb with Sealer Fitting
HTPOFAmerica
MSRP: $39.99$29.99This part is an Add On Air Bleeder kit featuring a Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug, (2) Clamps for each end of the tubing and 36" of Clear 3/8" ID and Silicon sealer.. This kit can be added if you...MSRP: $39.99$29.99 -
Barb Bleeder 1/4" Mpt X 3/8" with Silicon Kit for Waterway Pump Fitting
HTPOFAmerica
MSRP: $12.99$8.99This kit is anAir Bleeder barbed plug and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands just compare the pictures and measurements with your...MSRP: $12.99$8.99 -
_LG__56702__28523.1630832418.jpg?c=2)
_LG__15617__99687.1630827073.jpg?c=2 "Wet End, WW E-Series 1.5hp 1-1/2\"mbt/fpt 48fr")
Wet End, WW E-Series 1.5hp 1-1/2"mbt/fpt 48fr
Waterway Plastics
MSRP: $137.29$106.78The Waterway center discharge wet end has been discontinued and replaced with the E-Series Center Discharge wet end by the manufacturer. Please be sure which wet end you have as the parts are not interchangeable. The easiest way to identify which wet end...MSRP: $137.29$106.78 -
Wet End, Waterway, E-Series 1.0hp 1-1/2" Threaded, 48 Frame
HTPOFAmerica
MSRP: $137.99$106.99This part is a 48Frame Center Discharge 1 1/2 x 1 1/2" 1HP Waterway Wet End.. The threads would measure about 2 3/8" Edge to Edge.. This wet end would be found on a 115V motor with an Amperage of about 12 Amps or a 230V motor with an Amperage rating of...MSRP: $137.99$106.99 -
_LG__09847__17024.1630826303.jpg?c=2 "Wet End, WW E-Series 2.0hp 1-1/2\"mbt/fpt 48fr")
Wet End, WW E-Series 2.0hp 1-1/2"mbt/fpt 48fr
Waterway Plastics
MSRP: $137.29$106.78The Waterway center discharge wet end has been discontinued and replaced with the E-Series Center Discharge wet end by the manufacturer. Please be sure which wet end you have as the parts are not interchangeable. The easiest way to identify which wet end...MSRP: $137.29$106.78 -
Barb Bleeder 1/4" Mpt X 3/8" with Silicon, Coupler and Tubing Connect Kit for Waterway Pump Fitting
HTPOFAmerica
MSRP: $15.99$11.99This Connect Kit is an Air Bleeder barbed plug, 3/8" X 3/8" Barbed Coupler, 4" of 3/8" Tubing and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many...MSRP: $15.99$11.99 -
Dynasty Pump Barb Bleeder Connect Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings
HTPOFAmerica
MSRP: $24.99$18.99This kit is a Set of (2) Air Bleeder barbed plugs,(2) 3/8" x 3/8" Barb couplers, (2) 4" long pieces of 3/8" Tubing and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up...MSRP: $24.99$18.99