Description
This comprehensive 2" Spigot x (8) 3/4" Barb Manifold Retrofit Kit converts old glue-in style manifolds to modern barbed configurations. Complete kit contains: 2" Street x Slip Manifold featuring (8) 3/4" Barbs, (2) Barb Plugs for customizing barb count, (1) 2" Coupler for easy installation spinning, 6 feet of 2" Soft Pipe, (16) 3/4" Clamps, (8) 1/2" Slip/3/4" Street x 3/4" Barb fittings, plus 32" of Clear 3/4" Tubing pre-cut into sections providing approximately 4" per barb connection. Installation Guide: Measure your existing flex pipe outside diameter to determine proper connection method. For 3/4" OD (considered 1/2" pipe), glue directly inside the included 3/4" clear tubing. For 1" OD, apply purple primer and spin the included Barbed Couplers onto existing pipe. For 1 1/4" OD, additional 1" couplers (available separately from Global) are required - spin coupler onto old flex pipe, then glue barbed fitting into coupler and connect using 3/4" clear tube to manifold. This retrofit system replaces damaged old-style glue-in manifolds by extending output tubes using the included Barbed Couplers for spin connection to existing pipes, then gluing the 6" section of 2" Flex to one end before attaching the manifold. The Manifold accepts 2" pipe or fitting on inlet side and inserts into 2" fitting on outlet side. Complete kit valued at $71.99 offers significant savings versus purchasing components individually. Designed for newer hot tub applications. Note: Global stocks multiple kit configurations including options with glue included. In stock and ready to ship.
