Description
Complete 2 Horse Power Impeller, Seal, Bearing, Silicon and Seal Installation Tool Kit designed specifically for 56 Frame Pump Wet Ends made by Intertek LX Brand. This comprehensive repair kit is compatible with pumps displaying part numbers WUA-200, WP-200 or LP-200 on their identification label. Please review NOTES below for proper fitment...
Refer to instructional video content for detailed installation guidance and fitment verification procedures. The impeller measures approximately 4 1/8 inches across the face from edge to edge, approximately 3 inches from the front tip to the rear sleeve tip, and 7/16 inch from the inside vane edge to edge. Certain impellers may be marked with number B351-21 - if yours displays this marking, you must carefully measure the complete width of your impeller edge to edge to ensure correct selection, as the manufacturer produces one casting with this number and machines it down to accommodate different horsepower specifications. The included bearing is compatible with motors used with this wet end configuration.
IMPORTANT NOTE: While this Wet End shares visual similarities with Aqua-Flo and CMP Wet End models, proper measurement verification is essential for correct part identification and fitment.
