HTPOFAmerica

Waterway Executive Wear Ring for 48/56 Frame 4HP 5HP Pumps & Intertek LX - 13/16" Thickness

(No reviews yet) Write a Review
SKU:
HTP35-270-1801a
Shipping:
Calculated at Checkout
  • Wear Ring, Waterway Executive 48 or 56 frame, 4.0 or 5.0 HP or some Intertek LX
  • Wear Ring, Waterway Executive 48 or 56 frame, 4.0 or 5.0 HP or some Intertek LX
  • This is an example of where you can find the actual HP rating for the original impeller.. Notice it say 2HP a little off set from the center.. Note: the 1 HP and the 5 HP Impellers do not have a stamp in them . Also these impellers have been redesigned so there are no longer numbers in the center the complete impeller part numbers are stamped in the outside face of the impeller so for a 1HP you will see 1HP: 35-270-1802 2HP: 35-270-1804 3HP: 35-270-1806
  • Wear Ring, Waterway Executive 48 or 56 frame , 4.0 or 5.0 HP example of where the wear ring goes as opposed to the impeller and face..
  • This is an example of this wear ring on the an impeller the impeller is sold separately...
  • Wear Ring, Waterway Executive 48 or 56 frame, 4.0 or 5.0 HP or some Intertek LX
  • Wear Ring, Waterway Executive 48 or 56 frame, 4.0 or 5.0 HP or some Intertek LX
  • Wear Ring, Waterway Executive 48 or 56 frame, 4.0 or 5.0 HP or some Intertek LX
  • Wear Ring, Waterway Executive 48 or 56 frame, 4.0 or 5.0 HP or some Intertek LX
  • Wear Ring, Waterway Executive 48 or 56 frame, 4.0 or 5.0 HP or some Intertek LX
  • Wear Ring, Waterway Executive 48 or 56 frame, 4.0 or 5.0 HP or some Intertek LX
MSRP: $14.99
$9.99
— You save $5.00

Description

This precision-engineered wear ring is specifically designed for Waterway Executive pump wet ends operating at 4.0 or 5.0 horsepower with 48 or 56 frame configurations, plus select Intertek models. The component features a precise 13/16 inch thickness measurement from front to back, ensuring optimal impeller clearance and pump performance.

Critical Compatibility Information: This wear ring is exclusively for 4HP and 5HP Executive wet end applications. Lower horsepower Waterway Executive pumps (1HP, 2HP, or 3HP) require a different, thicker wear ring measuring 1-1/16 inch front to back. Installing the incorrect thickness will result in improper pump operation.

Compatible With:

  • Waterway Executive 4.0 HP impellers (48/56 frame wet ends)
  • Waterway Executive 5.0 HP impellers (48/56 frame wet ends)
  • Select Intertek LX impeller assemblies

This wear ring serves as a critical interface component between the impeller and wet end housing, maintaining proper spacing to maximize hydraulic efficiency while minimizing friction and wear. Regular replacement during pump maintenance helps restore original performance specifications and extends the service life of your spa circulation system.

View AllClose

Related Products

Related Products