NOTE: This Part will Fit Sundance®or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click hereJacuzzi® & Sundance® LX Parts
NOTE: Most likley if you have a 2HP verion of this pump you have a 48 frame motor and this wet end is not correct but there are some 56 frame 2HP pumps out there in some Watkins or Lifesmart tubs..
This 2 Horse Power 56 Frame Pump Wet End fits Guangdong LX Brand Pump Motors only. These pumps usually have the part number WUA-200, WP-200 or LP-200 on the label.Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 4 13/16" from the back to front edge. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread. NOTE: This Wet End looks a lot like an Aqua-Flo and a CMP Wet End but they do not interchange!
Note: This Wet End Fits Guangdong Chinese LX and LP series Pumps only Some Pump Part numbers are as follows: (WUA200-II, WUA200-I) (LP200) (WP200-II/,200-I)
To Install this wet end you will have to loosen the thru bolts and unscrew the impeller. There are time where you will have to disassemble the motor in order to loosen the impeller because they get stuck when they leak. Note: We offer parts for this wet end and complete pumps in our store.
Visit our Store as we also offer these and other associated products and accessories for your Spa.
Please note: When you have a seal leaking in most cases you will need an impellor because the leak caused water to get into the metal shaft area that the impeller is screwed onto and expands and damages the impeller. We offer the impellers along with the seal in a kit in our store. Watch the video above for how to install the seal and other repairs for this pump as well.
