Air Button Style Analog Systems and Parts

This part is a Techmark 4000 Series 25Amp Pressure Switch with a Plastic Bottom and top that features 1/8th"" MPT Standard Threads and 2 Spade connectors for attaching the 2 wire connections. This Switch will fit Balboa, Gecko, ACC, Hydroquip, Len...

Potter&BrumfieldT-92 series relays rated at 30A and are available in various actions and coil voltages. Many manufacturers are replacing large power relays with the space saving T-92 relay. Dimensions are 2-3/4" x 1-1/2" x 1-3/8" ActionCoilAmps ...

ThermostatsSingle pole rated at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This is a safety device! If it is found to be out of...

This Part is a Surface Mount Style HI LIMIT: Single Pole Single Throw THERMAL FUSE Auto Reset (With NO CAPILLARY)This Hi Limit Surface mount surface mounts to the heater in a spot where it can read what the actual water temperature is flowing through the...

Tinytrol™ Air SensorProvide the same powerful switching action in a small package as found in larger air switches. Available in single pole or a very sensitive patented double pole designDPDT21 ampLatching9/16" thd

Potter&BrumfieldT-92 series relays rated at 30A and are available in various actions and coil voltages. Many manufacturers are replacing large power relays with the space saving T-92 relay. Dimensions are 2-3/4" x 1-1/2" x 1-3/8"ActionCoilAmpsDPDT120...

Series 3000 Pressure SwitchThis switch is found in many spa applications where a durable switch is required. It is rated at 25 amps and is available in a variety of mounting stylesStailness pan material. Optional plastic pan to prevent corrosion

This item is a 1/8" MPT Brass Plug which can be used to block an 1/8" MPT (male Pipe Thread) hole normally found on a Heater Tube on Hot Tubs. This hole size is the same size as a Pressure Switch hole and would measure about 3/8" wide across the hole or...

This part is a JAG 3 SPDT Momentary Single Pole Double Throw Switch contact. Momentary means this was used in conjunction with a sequencer or relay that does the work. Rated at 3 amps. Used in conjunction with most Len Gordon relays Note: This...

Enclosed Circuit Board RelayCoil contacts are on bottom of relay at PC board. Trace saver tabs are available at top of relay ActionCoilAmps SPST-NO 12 VDC 30amp Coil Voltage Type    DCRelay/Contactor Style  ...

This part is a Hi-Limit, 5/16" diameter, 12"Capillary, SPST, Screw Terminal, 25A Hi Limit Specs:Single pole rated at 25 amps with temperature rating set at 121°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or...

Double pole contactorCoilContact120 VAC50amp res