Description
This genuine Aqua-Flo by Gecko XP2e jet pump delivers powerful performance for heavily jetted spa systems. 56 frame XP2e rated at 5.0HP (functionally 4.5HP) operating at 230V with side discharge wet end configuration. Features 2 1/2 inch suction inlet (measures approximately 3 5/8 inches edge to edge) and 2 inch pressure outlet (measures approximately 3 inches edge to edge). Electrical draw is 15 Amps on high speed and 4.8 Amps on low speed.
Important: This particular pump configuration is rarely installed as original equipment in hot tubs, so verify compatibility carefully before ordering.
Voltage Verification: Confirm your system voltage by checking the pump label which displays either 115V or 230V. Alternatively, locate the white wire from the pump in your control pack: if connected to the red leg or #2 leg, the pump is 230V; if connected to the neutral or white AC leg, it operates at 115V. Always disconnect power at the breaker before performing any electrical checks.
The Flo-Master XP2e represents Aqua-Flo's energy-efficient solution within their high-performance spa pump lineup. Engineered specifically for large contemporary spas with multiple jet configurations requiring increased water flow, this pump maintains the same physical footprint as the original XP2 while delivering superior flow rates and enhanced energy efficiency.
Pump Specifications:
- Precision-engineered impeller optimized for maximum water movement and system performance
- Energy-conscious design reduces operating costs without sacrificing power
- Side discharge configuration for flexible installation
- 56 frame motor standard
- Available in 1-speed or 2-speed configurations
- Compatible with standard pump bleeder barb adapters (3/8 inch barb x 1/4 inch MPT)
