Description
This is a Balboa Retrofit Complete control system with a 15" long heater tube that will run (3) Jet Pumps or (2) Jet Pumps and a Blower, (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 7 Button Serial Standard Topside, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.
When you purchase a Retrofit Kit from us you will have access to call us when installing for advice that is part of your purchase.
This complete retrofit spa pack VS-510Z that can be hooked up 120/240V but this will depend on your components meaning if you have 230V pumps or blower you must wire this 230V if you have all 115V pumps and blowers you can wire 115V although you would not normally wire any system with more than one pump 115V.
Overall dimensions are 11" Tall x 15" Wide x 4-1/2" Deep
This Retrofit Kit Includes:
- 5.5kW heater with Balboa's patented M7 technology (no pressure switches)
- Spa Control System 54371-HC
- Panel Model - Serial Standard: Panel Dimensions (in) 7.35 x 3.26 (cm) 18.67 x 8.28
- Other Parts Included - Cords, Bezel, and one LED light assembly
- 2 speed pump (120V/240V)
- 1 speed pump (240V)
- Blower (120V/240V)
- Ozone Generator (120V/240V)
- Spa Light (12V/12W)
Features & Benefits
Replaces failure-prone mechanical pressure/flow switch
Can be plumbed to either suction or pressure side of pump
120/240V convertible power
Custom plastic enclosure
M7 flow/ temperature sensors
Rigorously tested
US & Canadian safety approvals
• 120V / 240V Circ Pump*
* = Ozone and Circ Pump must be same voltage.