Description
This Kit is a Gray Buttress Notched 3 3/4" Spa Diverter Cap, Handle Knob, Stem & O-Rings only. This is a Buttress style Cap if your cap has the word Buttress stamped in it look in our store for a Non-Buttress cap. This Diverter Cap mounts on top of the Diverter Valve with the Stem sticking through that the (2) Small O-Rings god on then this handle goes in top of the stem square The Large O-Ring fits on the body under the cap. The Diverter Valve that this part fits is used to Divert Water into different sides of a hot tub and fits many different brands. The outside measurement of the Cap is about 3 3/4" the inside thread measurement is about 2 3/4" and the center hole where the stem and o-rings go measures about 3/4", Then the handle is about 4" long end to end and 2" wide side to side at thew widest part and the square hole in handle is 7/16" wide, The Stem fits into the valve body the stem is 5 7/16" Long and the widest part is 2 1/4" wide and the square part on the top that the handle fits on is 7/16" wide. This Part is used in Many Brand of Hot Tub With Gray Colored Parts.