(G) Heater Element 4.0kw Gasket Kit Hot Tub Spa Part M7 Balboa Gecko Hydroquip Titanium Silicon Kit (Best Value)

MSRP: $134.99
(You save $52.00 )
(No reviews yet) Write a Review
Calculated at Checkout
Adding to cart… The item has been added

You are buying on a 4.0KW Titanium Heater Element with (2) Gaskets and a 1/2Oz Tube of Special Hot Tub Formulated Silicon Sealer to Seal the Threads. This Heater Element features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko, ACC, Spa Guts, Spa Builders, Led Gordon,  Brett Aqualine and most other standard 15" Hot Tub Heater Tubes. The list on this Heater is $134.99.

The Gaskets in the it have a 2 1/.2" center to center lip which fits almost all 2" Hot Tub Heater unions..

We do offer this Titanium Element without the silicon kit:
Note: When testing this heater if it trips the breaker simply unplug it and if the breaker stays on plug back in and if it trips this heater is the cause if it is not a breaker trip issue then measure between the two terminals with an Ohm meter it should measure about 14.5K ohms. If it measures 0K it is open. If it is not tripping the breaker and doesn't measure open then the heater is not bad look for other issues that cause no heat Like a Pressure Switch, Stopped up filter, No water movement, Open circuit on board etc…..

Please Choose with Care as We Do Not Accept Returns.

We have done a lot of extra work with videos and pictures to prevent you from choosing the wrong part..